ISL3293E, ISL3294E, ISL3295E, ISL3296E,
ISL3297E, ISL3298E
®
Data Sheet
September 19, 2007
FN6544.0
±16.5kV ESD Protected, +125°C, 3.0V to
5.5V, SOT-23/TDFN Packaged, Low Power,
RS-485/RS-422 Transmitters
Features
• High ESD Protection on RS-485 Outputs . . ±16.5kV HBM
- IEC61000-4-2 Contact Test Method . . . . . . . . . . . . ±7kV
- Class 3 ESD Level on all Other Pins . . . . . . >8kV HBM
The Intersil ISL3293E, ISL3294E, ISL3295E, ISL3296E,
ISL3297E, ISL3298E are ±16.5kV HBM ESD Protected (7kV
IEC61000 contact), 3.0V to 5.5V powered, single
• Specified for +125°C Operation (V
≤ 3.6V Only)
CC
• Logic Supply Pin (V ) Eases Operation in Mixed Supply
L
Systems (ISL3296E through ISL3298E Only)
transmitters for balanced communication using the RS-485
and RS-422 standards. These drivers have very low bus
currents (±40mA), so they present less than a “1/8 unit load”
to the RS-485 bus. This allows more than 256 transmitters on
the network without violating the RS-485 specification’s
32 unit load maximum, and without using repeaters.
• Hot Plug - Tx Outputs Remain Three-state During
Power-up
• Low Tx Leakage Allows >256 Devices on the Bus
• High Data Rates. . . . . . . . . . . . . . . . . . . . . up to 20Mbps
Hot Plug circuitry ensures that the Tx outputs remain in a
high impedance state while the power supply stabilizes.
• Low Quiescent Supply Current . . . . . . . . . . .150µA (Max)
- Very Low Shutdown Supply Current. . . . . . . 1µA (Max)
The ISL3293E, ISL3294E, ISL3296E, ISL3297E utilize slew
rate limited drivers which reduce EMI, and minimize reflections
from improperly terminated transmission lines, or from
unterminated stubs in multidrop and multipoint applications.
Drivers on the ISL3295E and ISL3298E are not limited, so they
can achieve the 20Mbps data rate. All versions are offered in
Industrial and Extended Industrial (-40°C to +125°C)
temperature ranges.
• -7V to +12V Common Mode Output Voltage Range
(V
≤ 3.6V Only)
CC
• Current Limiting and Thermal Shutdown for Driver
Overload Protection (V
• Tri-statable Tx Outputs
≤ 3.6V Only)
CC
• 5V Tolerant Logic Inputs When V
• Pb-Free (RoHS Compliant)
≤5V
CC
A 26% smaller footprint is available with the ISL3296E,
ISL3297E, ISL3298E’s TDFN package. These devices also
feature a logic supply pin (V ) that sets the switching points
of the DE and DI inputs to be compatible with a lower supply
voltage in mixed voltage systems.
L
Applications
• Clock Distribution
• High Node Count Systems
• Space Constrained Systems
• Security Camera Networks
For companion single RS-485 receivers in micro packages,
please see the ISL3280E, ISL3281E, ISL3282E, ISL3283E,
ISL3284E data sheet.
• Building Environmental Control/ Lighting Systems
• Industrial/Process Control Networks
TABLE 1. SUMMARY OF FEATURES
TX
MAXIMUM
ENABLE? QUIESCENT LOW POWER
PART
DATA RATE SLEW-RATE
HOT
PIN
NUMBER
FUNCTION
1 Tx
(Mbps)
0.25
0.5
LIMITED?
PLUG?
V
PIN?
(Note 10)
I
(µA)
SHUTDOWN?
COUNT
L
CC
ISL3293E
ISL3294E
ISL3295E
ISL3296E
ISL3297E
ISL3298E
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
150
YES
6 Ld SOT
6 Ld SOT
6 Ld SOT
8 Ld TDFN
8 Ld TDFN
8 Ld TDFN
1 Tx
YES
YES
150
150
150
150
150
YES
1 Tx
20
NO
NO
YES
YES
1 Tx
0.25
0.5
YES
YES
YES
YES
YES
YES
1 Tx
YES
YES
YES
1 Tx
20
NO
YES
YES
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.