DATASHEET
ISL3295E, ISL3298E
±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low
Power, RS-485/RS-422 Transmitters
FN6544
Rev.4.00
Oct 9, 2019
The ISL3295E and ISL3298E are ±16.5kV HBM ESD Protected
Features
(7kV IEC61000 contact), 3.0V to 5.5V powered, single
• High ESD protection on RS-485 outputs . . . . ±16.5kV HBM
- IEC61000-4-2 contact test method . . . . . . . . . . . . . . . ±7kV
- Class 3 ESD level on all other pins. . . . . . . . . . . .>8kV HBM
transmitters for balanced communication using the RS-485
and RS-422 standards. These drivers have very low output
leakage current (±40µA), so they present less than a “1/8 unit
load” to the RS-485 bus. This allows more than 256
transmitters on the network without violating the RS-485
specification’s 32 unit load maximum, and without using
repeaters.
• Specified for +125°C operation (V ≤ 3.6V only)
CC
• Logic supply pin (V ) eases operation in mixed supply
L
systems (ISL3298E only)
Hot Plug circuitry ensures that the Tx outputs remain in a high
impedance state while the power supply stabilizes.
• Hot plug - Tx outputs remain three-state during power-up
• Low Tx leakage allows >256 devices on the bus
• High data rates. . . . . . . . . . . . . . . . . . . . . . . . . . up to 20Mbps
Drivers on the ISL3295E and ISL3298E are not limited, so they
can achieve the 20Mbps data rate. They are offered in industrial
and extended industrial (-40°C to +125°C) temperature
ranges.
• Low quiescent supply current. . . . . . . . . . . . . . . 150µA (max)
- Very low shutdown supply current . . . . . . . . . . . 1µA (max)
• -7V to +12V common-mode output voltage range
A 26% smaller footprint is available with the ISL3298E TDFN
(V ≤ 3.6V only)
CC
package. This device also features a logic supply pin (V ) that
L
sets the switching points of the DE and DI inputs to be
compatible with a lower supply voltage in mixed voltage
systems.
• Current limiting and thermal shutdown for driver overload
protection (V ≤ 3.6V only)
CC
• Tri-statable Tx outputs
For companion single RS-485 receivers in micro packages,
please see the ISL3280E, ISL3281E, ISL3282E, ISL3283E,
ISL3284E datasheet.
• 5V tolerant logic inputs when V ≤5V
CC
• Pb-free (RoHS compliant)
Related Literature
For a full list of related documents, visit our website
Applications
• Clock distribution
• ISL3295E and ISL3298E device pages
• High node count systems
• Space constrained systems
• Security camera networks
• Building environmental control/lighting systems
• Industrial/process control networks
TABLE 1. SUMMARY OF FEATURES
DATA
TX
MAXIMUM
RATE SLEW RATE HOT
V
ENABLE? QUIESCENT LOW POWER
PIN
L
PART NUMBER
FUNCTION (Mbps) LIMITED? PLUG? PIN? (Note 11)
I
(µA)
SHUTDOWN?
YES
COUNT
CC
150
150
ISL3295E
ISL3298E
1 Tx
1 Tx
20
20
NO
NO
YES
NO
YES
YES
6 Ld SOT
YES YES
YES
8 Ld TDFN
FN6544 Rev.4.00
Oct 9, 2019
Page 1 of 17