ISL28274, ISL28474
®
Data Sheet
December 13, 2006
FN6345.0
Micropower, Single Supply, Rail-to-Rail
Input-Output Instrumentation Amplifier
and Precision Operational Amplifier
Features
• Combination of IN-AMP and OP-AMP in a single package
• 120µA supply current for ISL28274
• Input Offset Voltage IN-AMP 400µV max
• Input Offset Voltage OP-AMP 225µV max
• 30pA max input bias current
The ISL28274 is a combination of a micropower
instrumentation amplifier (Amp A) with a low power precision
amplifier (Amp B) in a single package. The ISL28474 consist
of two micropower instrumentation amplifiers (Amp A) and
two low power precision amplifiers (Amp B) in a single
package. The amplifiers are optimized for operation at 2.4V
to 5V single supplies. Inputs and outputs can operate rail-to-
rail. As with all instrumentation amplifiers, a pair of inputs
provide a high common-mode rejection and are completely
independent from a pair of feedback terminals. The
feedback terminals allow zero input to be translated to any
output offset, including ground. A feedback divider controls
the overall gain of the amplifier. The additional precision
amplifier can be used to generate higher gain, with smaller
feedback resistors or used to generate a reference voltage.
• 100dB CMRR and PSRR
• Single supply operation of 2.4V to 5.0V
• Ground Sensing
• Input voltage range is rail-to-rail and output swings
rail-to-rail
• Pb-free plus anneal available (RoHS compliant)
Applications
• 4-20mA loops
The instrumentation amp (Amp A) is compensated for a gain
of 100 or more and the precision amp (Amp B) is unity gain
stable. Both amplifiers have PMOS inputs that provide less
than 30pA input bias currents.
• Industrial Process Control
• Medical Instrumentations
The amplifiers can be operated from one lithium cell or two
Ni-Cd batteries. The amplifiers input range goes from below
ground to slightly above positive rail. The output stage
swings completely to ground or positive supply - no pull-up
or pull-down resistors are needed.
Ordering Information
PART NUMBER
(Note)
PART
QTY. PER PACKAGE
PKG.
DWG. #
MARKING TUBE/REEL (Pb-Free)
ISL28274FAZ
28274FAZ
97/Tube 16 Ld QSOP MDP0040
ISL28274FAZ-T7 28274FAZ
7”
16 Ld QSOP MDP0040
(1000 pcs) Tape & Reel
Coming Soon
ISL28474FAZ 55 /Tube 24 Ld QSOP MDP0040
ISL28474FAZ
Coming Soon
ISL28474FAZ
7”
24 Ld QSOP MDP0040
ISL28474FAZ-T7
(1000 pcs) Tape & Reel
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
1
All other trademarks mentioned are the property of their respective owners.