ISL28286, ISL28486
®
Data Sheet
September 22, 2006
FN6312.0
Dual Micropower Single Supply
Rail-to-Rail Input and Output (RRIO)
Precision Op-Amp
Features
• 120µA typ supply current for both channels
• 600µV max offset voltage
The ISL28286 and ISL28486 are Dual and Quad channel
micropower precision operational amplifiers optimized for
single supply operation at 5V down to 2.4V. For equivalent
performance in a single channel op-amp reference EL8186.
• 500pA typ input bias current
• 400kHz gain-bandwidth product
• 115dB PSRR and CMRR
The ISL28286 and ISL28486 feature an Input Range
Enhancement Circuit (IREC) which enables both parts to
maintain CMRR performance for input voltages equal to the
positive and negative supply rails. The input signal is
capable of swinging 10% above the positive supply rail and
to ground with only a slight degradation of the CMRR
performance. The output operation is rail to rail.
• Single supply operation down to 2.4V
• Input is capable of swinging above V+ and to V- (ground
sensing)
• Rail-to-rail input and output (RRIO)
• Pb-free plus anneal available (RoHS compliant)
Both parts draw minimal supply current while meeting
excellent DC-accuracy, AC-performance, noise and output
drive specifications.
Applications
• Battery- or solar-powered systems
• 4mA to 25mA current loops
• Handheld consumer products
• Medical devices
The ISL28286 and ISL28486 can be operated from a single
lithium cell or two Ni-Cd batteries. The input range includes
both positive and negative rail.
• Thermocouple amplifiers
• Photodiode pre-amps
• pH probe amplifiers
Ordering Information
PART
TAPE &
REEL
PKG.
DWG. #
PART NUMBER MARKING
PACKAGE
ISL28286FUZ
(See Note)
8286Z
50/Tube 10 Ld MSOP MDPOO43
(Pb-free)
ISL28286FUZ-T7 8286Z
(See Note)
7”
10 Ld MSOP MDP0043
(1500 pcs) (Pb-free)
Coming Soon
ISL28486FAZ
(Note)
28486FAZ
97/Tube 16 Ld QSOP MDP0040
(Pb-free)
Coming Soon
ISL28486FAZ-T7
(Note)
28486FAZ
7”
16 Ld QSOP MDP0040
(1000 pcs) (Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.