5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO)
Op Amps
ISL28236
Features
The ISL28236 is a low-power dual operational amplifier
optimized for single supply operation from 2.4V to 5.5V,
allowing operation from one lithium cell or two Ni-Cd batteries.
The device features a gain-bandwidth product of 5MHz.
• 5MHz gain bandwidth product at A = 100
V
• 2mA typical supply current
• 240µV maximum offset voltage (SOIC package)
• 6nA typical input bias current (SOIC package)
• Down to 2.4V single supply voltage range
• Rail-to-rail input and output
The ISL28236 features an Input Range Enhancement Circuit
(IREC), which enables the amplifier to maintain CMRR
performance for input voltages greater than the positive
supply. The input signal is capable of swinging 0.25V above the
positive supply and to the negative supply with only a slight
degradation of the CMRR performance. The output operation
is rail-to-rail.
• -40°C to +125°C operation
• Pb-Free (RoHS compliant)
Applications
• Low-end audio
The part typically draws less than 1mA supply current per
amplifier while meeting excellent DC accuracy, AC
performance, noise and output drive specifications. The
ISL28236 is available in the 8 Ld SOIC and the 8 Ld MSOP.
Operation is guaranteed over the -40°C to +125°C
temperature range.
• 4mA to 20mA current loops
• Medical devices
• Sensor amplifiers
• ADC Buffers
Ordering Information
• DAC output amplifiers
PART
NUMBER
(Notes 2, 3)
Related Literature
• AN1420, “ISL282x6EVAL1Z Evaluation Board User’s Guide”
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL28236FBZ
28236 FBZ 8 Ld SOIC
28236 FBZ 8 Ld SOIC
M8.15E
ISL28236FBZ-T7
(Note 1)
M8.15E
ISL28236FBZ-T7A
(Note 1)
28236 FBZ 8 Ld SOIC
M8.15E
ISL28236FUZ
8236Z
8236Z
8 Ld MSOP
8 Ld MSOP
M8.118A
M8.118A
ISL28236FUZ-T7
(Note 1)
ISL28236FUZ-T7A
(Note 1)
8236Z
8 Ld MSOP
M8.118A
ISL28236SOICEVAL1Z Evaluation Board
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials,
and 100% matte tin plate plus anneal (e3 termination finish, which
is RoHS compliant and compatible with both SnPb and Pb-free
soldering operations). Intersil Pb-free products are MSL classified
at Pb-free peak reflow temperatures that meet or exceed the
Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see product
information page for ISL28236. For more information on MSL,
please see tech brief TB363.
July 24, 2014
FN6921.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2009, 2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1