ISL28156, ISL28256
®
Data Sheet
February 27, 2007
FN6154.2
39µA Micropower Single and Dual
Precision Rail-to-Rail Input-Output (RRIO)
Low Input Bias Current Op Amps
Features
• 39µA typical supply current
• 5nA max input bias current
The ISL28156 and ISL28256 are micropower precision
operational amplifiers optimized for single supply operation
at 5V and can operated down to 2.4V.
• 250kHz gain bandwidth product (A = 1)
V
• 2.4V to 5.5V single supply voltage range
• Rail-to-rail input and output
These devices feature an Input Range Enhancement Circuit
(IREC) which enables them to maintain CMRR performance
for input voltages greater than the positive supply. The input
signal is capable of swinging 0.5V above a 5.0V supply (0.25
for a 2.5V supply) and to within 10mV from ground. The
output operation is rail-to-rail.
• Enable pin (ISL28156 only)
• Pb-free plus anneal available (RoHS compliant)
Applications
• Battery- or solar-powered systems
• 4mA to 20mA current loops
• Handheld consumer products
• Medical devices
The 1/f corner of the voltage noise spectrum is at 1kHz. This
results in low frequency noise performance which can only
be found on devices with an order of magnitude higher
supply current.
ISL28156 and ISL28256 can be operated from one lithium
cell or two Ni-Cd batteries. The input range includes both
positive and negative rail. The output swings to both rails.
• Sensor amplifiers
• ADC buffers
• DAC output amplifiers
Ordering Information
TAPE
PART NUMBER
(Note)
PART
MARKING
AND
REEL
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL28156FHZ-T7 GABV
ISL28156FBZ 28156FBZ
ISL28156FBZ-T7 28156FBZ 7” (1k pcs) 8 Ld SOIC
7” (3k pcs) 6 Ld SOT-23 MDP0038
97/Tube 8 Ld SOIC
MDP0027
MDP0027
MDP0027
Coming Soon
7” (1k pcs) 8 Ld SOIC
ISL28256FAZ-T7
Coming Soon
7”
8 Ld MSOP MDP0043
ISL28256FAZ-T7
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006, 2007. All Rights Reserved.
1
All other trademarks mentioned are the property of their respective owners.