IS31FL3189
AUDIO MODULATED LED DRIVER
November 2011
GENERAL DESCRIPTION
FEATURES
The IS31FL3189 is an LED driver with an audio
synchronization mode that virtually eliminates the need
of real time software processing for LED lighting
effects.
10 outputs each with 38.9mA at 0.4V headroom.
2 independently controlled, 6 channels of 256
steps PWM RGB LED drivers with programmable
brightness and blinking patterns for LED’s lighting
effects
Fully programmable operating modes:
Audio synchronization mode
Audio synchronization +Top-down scan mode
Top-down scan mode
Constant current mode
One Shot Programming mode with Gamma
correction
Interface intensity control mode with 256 steps
current level setting for RGB lighting effects
RGB blink/not blink with audio mode
Each outputs enable/disable individually
Programmable parameter setting:
Audio gain setting
Top-down scan mode output current setting
Top-down scan mode scan rate setting
RGB mode output current setting
Programmable Output Current Level settings
For Anode-common LEDs
The OUT0~9 can be operated at 4 basic modes:
Audio synchronization mode, top-down scan mode,
constant current mode, combination of audio
synchronization and top-down scan mode.
Each of the OUT0~2, OUT7~9 is a constant current
sink pulse width modulated in 256 steps, featuring One
Shot Programming mode and Interface Intensity
Control mode for RGB lighting effects. The output
current is user selectable to be one of 5 levels, 17.5mA,
28.9mA, 38.9mA, 46.7mA or 66.5mA (typical). At
38.9mA the IS31FL3189 outputs require only 0.4V of
headroom voltage.
In One Shot Programming mode, the timing
characteristics for output current - current ramping up,
holding, ramping down and off time, can be adjusted
individually so that each output can independently
maintain a pre-established pattern without requiring
any additional interface activity, thus saving valuable
system resources.
In Interface Intensity Control mode, the PWM duty
cycle of each output can be independently
programmed and controlled in 256 steps to simplify
color mixing.
VDD Range: 3.0V to 5.5V
Package: QFN-20, 3mm × 3mm
APPLICATIONS
Cellular phones
MP3/MP4/CD/minidiskplayers
Digital picture frame/toys
TYPICAL APPLICATION CIRCUIT
Figure 1 Typical Application Circuit
Integrated Silicon Solution, Inc. – www.issi.com
Rev.A, 11/14/2011
1