DATASHEET
Radiation Hardened, Low Noise Quad Operational
Amplifiers
HS-5104ARH, HS-5104AEH
Features
The HS-5104ARH, HS-5104AEH are radiation hardened,
monolithic quad operational amplifiers that provide highly
reliable performance in harsh radiation environments.
Excellent noise characteristics coupled with a unique array of
dynamic specifications make these amplifiers well-suited for a
variety of satellite system applications. Dielectrically isolated,
bipolar processing makes these devices immune to Single
Event Latch-Up.
• Electrically screened to SMD # 5962-95690
• QML qualified per MIL-PRF-38535 requirements
• Radiation environment
- High dose rate (50-300rad(Si)/s). . . . . . . . . . . 100krad(Si)
- Low dose rate (0.01rad(Si)/s) . . . . . . . . . . . . . . .50krad(Si)
• No latch-up, dielectrically isolated device islands
• Low noise
The HS-5104ARH, HS-5104AEH show almost no change in offset
voltage after exposure to 100kRAD(Si) gamma radiation, with
only a minor increase in current. Complementing these
- At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3nV/Hz (Typ)
- At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6pA/Hz (Typ)
specifications is a post radiation open loop gain in excess of 40k.
• Low offset voltage . . . . . . . . . . . . . . . . . . . . . . . . .3.0mV (Max)
• High slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0V/µs (Typ)
• Gain bandwidth product . . . . . . . . . . . . . . . . . . . .8.0MHz (Typ)
These quad operational amplifiers are available in an industry
standard pinout, allowing for immediate interchangeability
with most other quad operational amplifiers.
Applications
• High Q, active filters
• Voltage regulators
• Integrators
• Signal generators
• Voltage references
• Space environment
Ordering Information
INTERNAL
PACKAGE
MKT. NUMBER
(NOTE 1 )
TEMP. RANGE
PART
MARKING
(RoHS Compliant)
(NOTE 2)
ORDERING/SMD NUMBER
5962R9569001VXC
5962R9569002VXC
5962R9569001VCC
5962R9569002VCC
5962R9569001V9A
5962R9569002V9A
HS1-5104ARH/PROTO
HS0-5104ARH/SAMPLE
HS9-5104ARH/PROTO
(°C)
PKG. DWG. #
K14.A
HS9-5104ARH-Q
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
Q 5962R95 69001VXC
Q 5962R95 69002VXC
Q 5962R95 69001VCC
Q 5962R95 69002VCC
14 Ld Flatpack
14 Ld Flatpack
14 Ld SBDIP
14 Ld SBDIP
Die
HS9-5104AEH-Q
K14.A
HS1-5104ARH-Q
D14.3
HS1-5104AEH-Q
D14.3
HS0-5104ARH-Q
HS0-5104AEH-Q
Die
HS1-5104ARH/PROTO
HS0-5104ARH/SAMPLE
HS9-5104ARH/PROTO
HS1-5104ARH/PROTO
HS9-5104ARH/PROTO
14 Ld SBDIP
Die
D14.3
K14.A
14 Ld Flatpack
1. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed in
the“Ordering Information” table must be used when ordering.
2. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with
both SnPb and Pb-free soldering operations.
July 12, 2013
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas LLC 2002, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
FN3025.5