MtronPTI HPO Series
For Harsh Environment Applications
Electrical Specifications:
Parameter
Frequency of Operation
Symbol
Min.
25.000
Typ.
Max.
150.000
Units
MHz
Conditions
FO
Frequency Stabilities
Frequency Stability Over the
Temperature Range
Over -55˚C to +125˚C
(FMax - FMin)/2
-5
+5
ppm
ppm
F/F
-25
-50
+25
Includes tolerance at +25°C, variation in supply
voltage, deviation over operating temperature
range and 20 years aging @ +25°C
Total Frequency Stability Over
20-years (ref. Model Table)
+50
Output
HCMOS/TTL Compatible
Output Type
Output Load
15
pF/TTL
Symmetry (duty cycle)
Logic “1” Level
Logic “0” Level
Rise/Fall Time
Random Jitter
Phase Jitter
TDC
VOH
VOL
45
90% VDD
55
%
V
V
½ VDD
HCMOS load
From 10% to 90% VDD
10% VDD
TR/TF
1.8
3
4
1
5
5
nS
pS RMS
фJ
pS RMS Integrated 12kHz to 20MHz
pS RMS RMS
pS
Period Jitter
Cycle to Cycle Jitter
SSB Phase Noise
-70
-104
-123
-130
-135
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
@ 10Hz Offset
@ 100Hz Offset
@ 1000Hz Offset
@ 10kHz Offset
@ 100kHz Offset
Typical (100MHz)
Under Static Conditions
Additional Specifications
80% VDD or
N/C
Tristate Enable Logic
V
Pad 1, Clock Signal Output
Pad 1, Output to High-Z
Tristate Disable Logic
Start-up Time
0.5
10
V
mS
TSU
Supply
Operating Voltage
Operating Current
VDD
IDD
3.135
3.3
3.465
90
V
mA
Temperature Range
Operating Temperature
Storage Temperature
TA
TS
-55
-55
+125
+125
°C
°C
Environmental, Mechanical & Test Report Requirements:
Mechanical Shock
Vibration
Thermal Cycle
Hermeticity
Solderability
Package Type
Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms duration, ½ sinewave)
Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz)
Per MIL-STD-883, Method 1010, B (-55°C to 125°C, 15 min. dwell, 10 cycles)
Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium)
Per EIAJ-STD-002
6 Pad Ceramic Leadless or 4-lead Gull Wing Configuration (Ref. Figure 1 and Figure 2)
Special Screening Steps:
The parts shall be subjected to the following screening sequence after they are sealed.
1. Burn-in: 168-hours minimum @ +125˚C
2. Frequency vs Temperature Test
3. Final Electrical Test
1 of 2
MtronPTI may change specifications without notice to improve end application performance or product manufacturability.
No liability is assumed as a result of product use or application. Please contact MtronPTI for latest information.