Datasheet
HIP2210, HIP2211
100V, 3A Source, 4A Sink, High Frequency Half-Bridge Drivers with HI/LI or Tri-Level PWM Input
and Adjustable Dead Time
The HIP2210 and HIP2211 are 100V, 3A source, 4A
Features
sink high-frequency half-bridge NMOS FET drivers.
• HIP2211 drop-in replacement for the ISL2111 and
The HIP2211 features standard HI/LI inputs and is
HIP2101 8 Ld SOIC, 8 Ld DFN, and 10 Ld TDFN
pin-compatible with popular Renesas bridge drivers
packages
such as the HIP2101 and ISL2111. The HIP2210
• 115V bootstrap supply maximum voltage
supports 100V on the half-bridge
features a tri-level PWM input with programmable
dead time. Its wide operating supply range of 6V to
18V and integrated high-side bootstrap diode
supports driving the high-side and low-side NMOS in
100V half-bridge applications.
DC
• 3A source and 4A sink gate drivers for NMOS FETs
• Fast propagation delay and matching: 15ns typical
delay; 2ns typical matching (HIP2211)
These drivers feature strong 3A source, 4A sink
drivers with very fast 15ns typical propagation delay
and 2ns typical delay matching, making it optimal for
high-frequency switching applications. VDD and boot
UVLO protects against an undervoltage operation.
• Integrated 0.5Ω typical bootstrap diode
• Wide 6V to 18V operating voltage range
• VDD and boot Undervoltage Lockout (UVLO)
• Robust noise tolerance: wide hysteresis at inputs;
HS pin tolerates up to -10V continuous
The tri-level input of the HIP2210 PWM pin controls
the high-side and low-side drivers with a single pin.
When the PWM input is at logic high, the high-side
bridge FET is turned on and the low-side FET is off.
When the input is at logic low, the low-side bridge FET
is turned on and the high-side FET is turned off. When
the input voltage is in the mid-level state, both the
high-side and low-side bridge FETs are turned off.
The PWM threshold levels are proportional to an
external input reference voltage on the VREF pin,
allowing PWM operation across a 2.7V to 5.5V logic
range.
• HIP2211: HI/LI inputs 3.3V logic compatible with
VDD voltage tolerance
• HIP2210: Tri-Level PWM input with logic threshold
levels set by external VREF pin from 2.7V to 5.5V
• HIP2210: Programmable dead time prevents
shoot-through; adjustable from 35ns to 350ns with a
single resistor
Applications
• Telecom half-bridge and full-bridge DC/DC
converters
The HIP2210 is offered in a 10 Ld 4x4mm TDFN
package. The HIP2211 is offered in 8 Ld SOIC, 8 Ld
4x4mm DFN, and 10 Ld 4x4mm TDFN packages.
• 3-phase BLDC motor driver; H-Bridge motor driver
• Two-switch forward and active clamp converters
• Multiphase PWM DC/DC controllers
• Class-D amplifiers
Related Literature
For a full list of related documents, visit our website:
• HIP2210, HIP2211 device pages
12V
12V
VDD
VCC
VDD
1
100V
100V
VREF
HB
HB
VCC
2
HO
HO
3
EN
HI
HS
PWM
DC/DC
Controller
5
6
PWM
RDT
HS
LO
PWM
Controller
HIP2210
10 Ld DFN
VOUT
VSS
HIP2211
4
8
VOUT
VSS
LI
LO
VSS
VSS
7
HIP2210 PWM Input with Programmble Dead Time
HIP2211 Pin-to-Pin Compatible with ISL2111
Figure 1. HIP2211 HI/LI Input Bridge Driver Typical
Application
Figure 2. HIP2210 PWM Input Bridge Driver Typical
Application
FN9347 Rev.1.01
Jun.23.20
Page 1 of 27