The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Card Edge Type Ribbon Cable Connector
HIF5 Series
Features
■
1. Product Variation
The area to install the connector body is classified into three types according to full
hole mounting area, semi-mounting area and non-mounting area.
2. Mounting Density Enhancement
This connector is designed so that the ribbon cable can turn
back within the connector molding range. The connector can be
installed without coming out of the insulator.
3. Applicable Cable
The applicable cable is a <UL2651>AWG#28 flat cable
(7 pcs./0.127mm, jacket dia.: 0.8~1.0mm).
Applications
■
■
Computers, FDD, various kinds of electronic equipment.
Product Specifications
Current rating: 1A
Operating Temperature Range:–55 to +85ç (Note 1)
Storage Temperature Range:–10 to +60ç(Note 2)
Storage Humidity Range:40 to 70% (Note 2)
Rating
Voltage rating: 200V AC
Operating Moisture Range:40 to 80%
Item
Specification
Condition
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
500V DC
1000M ohms min.
650V AC/1 minute
0.1A
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Insulation resistance: 1000M ohms min.
Humidity (Steady state)
96 hours at temperature of 40ç and humidity of 90% to 95%
(–65ç: 30 minutes 15 to 35ç: 5 minutes max.
➝
6. Temperature Cycle
No damage, cracks, or parts looseness.
125ç: 30 minutes 15 to 35ç: 5 minutes max.) 5 cycles
➝
7. Durability (Mating/un-mating)
500 cycles
Contact resistance15m ohms max.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and
specifications for a specific part number shown.
Material
■
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
Insulator
Contact area
Gold plated over nickel underplated
Contact
Copper alloy
---------------
Connection area
Nickel plated
Ordering Information
■
HIF5 B - * D A - 2.54 R
1
2
3
4
5
6
7
Series Name: HIF5
Contact alignment: D : Double
Plating type: A : Selective gold plated
Contact Pitch: 2.54mm
1
2
4
Mold type B: With full mounting hole
5
6
7
C: With half mounting hole
D: Without mounting hole
Connection type: R : Ribbon cable
Number of contacts: 20, 26, 34, 40, 50, 60
3
B59