Card Edge Type Ribbon Cable Connector
HIF5 Series
Features
1. Product Variation
■
The area to install the connector body is classified into three types according to full
hole mounting area, semi-mounting area and non-mounting area.
2. Mounting Density Enhancement
This connector is designed so that the ribbon cable can turn
back within the connector molding range. The connector can be
installed without coming out of the insulator.
3. Applicable Cable
The applicable cable is a <UL2651>AWG#28 flat cable
(7 pcs./0.127mm, jacket dia.: 0.8~1.0mm).
Applications
■■
Computers, FDD, various kinds of electronic equipment.
Product Specifications
■
Current rating: 1A
Operating Temperature Range:–55 to +85ç (Note 1)
Operating Moisture Range:40 to 80%
Storage Temperature Range:–10 to +60ç(Note 2)
Storage Humidity Range:40 to 70% (Note 2)
Rating
Voltage rating: 200V AC
Item
Specification
Condition
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
500V DC
1000M ohms min.
650V AC/1 minute
0.1A
No flashover or insulation breakdown.
15m ohms max.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
No electrical discontinuity of 1µs or more
5.
Insulation resistance: 1000M ohms min.
Humidity (Steady state)
96 hours at temperature of 40ç and humidity of 90% to 95%
(–55ç: 30 minutes 15 to 35ç: 5 minutes max.
■
6. Temperature Cycle
No damage, cracks, or parts looseness.
125ç: 30 minutes 15 to 35ç: 5 minutes max.) 5 cycles
■
7. Durability (Mating/un-mating)
8. Resistance to
Soldering heat
500 cycles
Contact resistance15m ohms max.
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Material
■
■
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
Insulator
Contact area
Gold plated
Contact
Copper alloy
---------------
Connection area
Tin-lead plated
Ordering Information
HIF5 B - * D A - 2.54 R
1
2
3
4
5
6
7
Series Name: HIF 5
Contact alignment: D : Double
Plating type: A : Selective gold plated
Contact Pitch: 2.54mm
1
2
4
Mold type B: With full mounting hole
5
6
7
C: With half mounting hole
D: Without mounting hole
Connection type: R : Ribbon cable
Number of contacts: 20, 26, 34, 40, 50, 60
3
B55