HEF4541B-Q100
Programmable timer
Rev. 3 — 25 November 2021
Product data sheet
1. General description
The HEF4541B-Q100 is a programmable timer. It consists of a 16-stage binary counter, an
integrated oscillator to be used with external timing components, an automatic power-on reset
and output control logic. The external components RTC and CTC determines the frequency of the
oscillator within the frequency range 1 Hz to 100 kHz. An external clock signal at input RS can
replace the oscillator. The timer advances on the positive-going transition of RS. A LOW on the
auto reset input (AR) and a LOW on the master reset input (MR) enables the internal power-on
reset. A HIGH level at input MR resets the counter independent on all other inputs. Resetting,
disables the oscillator to provide no active power dissipation.
A HIGH at input AR turns off the power-on reset to provide a low quiescent power dissipation of the
timer. The 16-stage counter divides the oscillator frequency by 28, 210, 213 or 216 depending on the
state of the address inputs (A0, A1). The divided oscillator frequency is available at output O. The
phase input (PH) features a complementary output signal. When the mode select input (MODE) is
LOW the timer is a single transition timer and when HIGH the timer is a 2n frequency divider.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually
ground). Unused inputs must be connected to VDD, VSS, or another input.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100
(Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
•
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
•
•
•
•
•
•
•
•
•
Wide supply voltage range from 3.0 V to 15.0 V
CMOS low power dissipation
High noise immunity
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
Complies with JEDEC standard JESD 13-B
ESD protection:
•
•
•
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
HEF4541BT-Q100 -40 °C to +125 °C
SO14
plastic small outline package; 14 leads;
body width 3.9 mm
SOT108-1