APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
-40 C TO +105 C (NOTE1)
1 -10 C TO +60 C(NOTE2)
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
TEMPERATURE RANGE
RATING
3
A
CURRENT
VOLTAGE
1
STORAGE
HUMIDITY RANGE
250V AC
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
ACCORDING TO DRAWING.
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
VOLTAGE DROP
12 V DC,1A DC.
30 mV/A MAX .
×
×
-
-
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
20 mV AC , 1 mA AND 10 mA AC.
30 mΩ MAX .
×
×
-
-
500 V DC FOR 30 sec.
1000 V AC FOR 1 min.
100 MΩ MIN.
VOLTAGE PROOF
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
50 TIMES OF INSERTION AND EXTRACTION.
① CONTACT RESISTANCE MILLIVOLT
LEVEL METHOD : 60 m MAX.
② NO DAMAGE, CRACK AND DISTORTION OF
PARTS.
×
×
×
×
×
×
×
×
-
-
-
-
-
-
-
-
VIBRATION
FREQUENCY AT 20 TO 600 Hz,
ACCELERATION AT 1.0~43.1 m/s2
FOR 3 h ON EACH 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 7
OR MORE FOR 1 s.
② CONTACT RESISTANCE MILLIVOLT LEVEL
METHOD : 60 m MAX.
③ NO DAMAGE, CRACK AND DISTORTION OF
PARTS.
SHOCK
AFTER THE DRY HEAT TEST,
APPLYING SHOCK 3 TIMES
① NO ELECTRICAL DISCONTINUITY OF 7
OR MORE FOR 1 s.
② NO DAMAGE, CRACK AND DISTORTION OF
WITH ACCELERATION AT 981 m/s2
IN BOTH DIRECTIONS OF THE 3 AXES.
PULL BACK IN THE MATING DIRECTION AND
MEASURE THE FORCE AT THE MOMENT OF
THE LOCK IS BROKEN.
PARTS.
LOCK STRENGTH
100 N MIN.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE MILLIVOLT
LEVEL METHOD : 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND DISTORTION OF
PARTS.
EXPOSED AT 60 C, 90 ~ 95 % RH FOR 96 h.
×
-
×
×
-
-
THERMAL SHOCK
DRY HEAT
① CONTACT RESISTANCE MILLIVOLT
LEVEL METHOD : 60 m MAX.
② NO DAMAGE, CRACK AND DISTORTION OF
PARTS.
TEMPERATURE- 40 → ROOM TEMP. →120 →
ROOM TEMP.
×
×
×
×
×
×
×
×
×
-
-
-
-
-
-
-
-
-
TIME
30 →
5 → 30 → 5 min
UNDER 500 CYCLES.
EXPOSED AT 120 C FOR 120 h.
① CONTACT RESISTANCE MILLIVOLT
LEVEL METHOD : 60 m MAX.
② NO DAMAGE, CRACK AND DISTORTION OF
PARTS.
① CONTACT RESISTANCE MILLIVOLT
LEVEL METHOD : 60 m MAX.
② NO DAMAGE, CRACK AND DISTORTION OF
PARTS.
COLD
EXPOSED AT -40C FOR 120 h.
RESISTANCE TO SO2 GAS
CONTACT RESISTANCE MILLIVOLT LEVEL
METHOD : 60 m MAX.
EXPOSED AT 40 C, 90 ~ 95 % RH, 10 ppm
FOR 24 h.
SPECIFIED TEMPERATURE PROFILE FOR
2CYCLES.
SOLDERED AT SPECIFIED TEMPERATURE
PROFILE.
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
NO DEFORMATION OF CASE AND EXCESSIVE
DISTORTION OF THE TERMINALS.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
AN.SAIKI
CHECKED
DATE
1
3
DIS-T-00009122
HH.TSUKUMO
AR.SHIRAI
HS.OZAWA
20210413
20180416
20180416
20180416
20180416
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
"STORAGE" means a long-term storage state for the unused product
before assembly to PCB.
(NOTE2)
YT.HAYAKAWA
SK.HANAWA
1
Note QT: Qualification Test AT: Assurance Test X: Applicable Test
DRAWING NO.
ELC-361741-10-00
PART NO.
CODE NO.
GT25H2-16DP-2.2H(10)
SPECIFICATION SHEET
1
CL0775-0089-4-10
△
1/1
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1