APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
250 V AC
3
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
1A DC.
30 mΩ MAX .
30 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
×
×
-
-
500 V DC.
1000 MΩ MIN.
VOLTAGE PROOF
1000 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
×
-
TERMINAL INSERTION AND
MEASURING AT 100mm/min.
4.9N MAX.
EXTRACTION FORCE
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 60 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
-
-
VIBRATION
SHOCK
FREQUENCY 20 TO 400 Hz,
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE: 60 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
×
-
-
-
43.1 m/s2 AT 3 h FOR
3 DIRECTIONS.
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE: 60 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
① DURING APPLYING,MATING OMPLETELY.
② AFTER APPLYING,NO DEFECT OF MATING
PARTS.
×
×
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE: 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
EXPOSED AT 60 C, 90 ~ 95 %, 500 h.
×
×
×
-
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
① CONTACT RESISTANCE: 60 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
TEMPERATURE- 40 →5 TO 35 →120 →5 TO 35C
×
×
×
-
-
-
TIME
30 →
5 → 30 → 5 min
UNDER 1000 CYCLES.
DRY HEAT
EXPOSED AT 105C, 300 h.
① CONTACT RESISTANCE: 60 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
-
-
① CONTACT RESISTANCE: 60 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
-
-
COLD
EXPOSED AT -40C , 120 h.
RESISTANCE TO SO2 GAS
EXPOSED IN 500 PPM FOR 8h.
① CONTACT RESISTANCE: 60 m MAX.
×
×
×
-
-
-
RESISTANCE TO
SOLDERING HEAT
SOLDERABILITY
SPECIFIED TEMPERATURE PROFILE FOR
2CYCLES.
SOLDERED AT SPECIFIED TEMPERATURE
PROFILE.
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
AR.SHIRAI
16.09.09
16.09.09
16.09.09
16.09.09
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
HS.OZAWA
TK.SHISHIKURA
TK.SHISHIKURA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-358751-99-00
GT25H2-20DP-2.2H(99)
SPECIFICATION SHEET
0
CL775-0080-0-99
△
1/1
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1