Datasheet > GS88237AGB-225I

GS88237AGB-225I

更新时间： 2024-11-11 15:44:19

品牌	Logo	应用领域
GSI		静态存储器内存集成电路
页数	文件大小	规格书
28页	743K
描述
Cache SRAM, 256KX36, 2.2ns, CMOS, PBGA119, PLASTIC, BGA-119

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

GS88237AGB-225I 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	BGA
包装说明：	BGA,	针数：	119
Reach Compliance Code：	compliant	ECCN代码：	3A991.B.2.B
HTS代码：	8542.32.00.41	风险等级：	5.68
Is Samacsys：	N	最长访问时间：	2.2 ns
其他特性：	PIPELINED ARCHITECTURE; IT CAN ALSO OPERATE WITH 3.3V SUPPLY	JESD-30 代码：	R-PBGA-B119
JESD-609代码：	e1	长度：	22 mm
内存密度：	9437184 bit	内存集成电路类型：	CACHE SRAM
内存宽度：	36	湿度敏感等级：	3
功能数量：	1	端子数量：	119
字数：	262144 words	字数代码：	256000
工作模式：	SYNCHRONOUS	最高工作温度：	85 °C
最低工作温度：	-40 °C	组织：	256KX36
封装主体材料：	PLASTIC/EPOXY	封装代码：	BGA
封装形状：	RECTANGULAR	封装形式：	GRID ARRAY
并行/串行：	PARALLEL	峰值回流温度（摄氏度）：	260
认证状态：	Not Qualified	座面最大高度：	1.99 mm
最大供电电压 (Vsup)：	2.7 V	最小供电电压 (Vsup)：	2.3 V
标称供电电压 (Vsup)：	2.5 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	TIN SILVER COPPER	端子形式：	BALL
端子节距：	1.27 mm	端子位置：	BOTTOM
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	14 mm
Base Number Matches：	1

GS88237AGB-225I 数据手册

GS88237AB-250/225/200/166/150/133

250 MHz–133 MHz

119-Bump BGA

Commercial Temp

Industrial Temp

256K x 36

9Mb Synchronous Burst SRAMs

2.5 V or 3.3 V V

2.5 V or 3.3 V I/O

SCD and DCD Pipelined Reads

Features

The GS88237AB is a SCD (Single Cycle Deselect) and DCD

(Dual Cycle Deselect) pipelined synchronous SRAM. DCD

SRAMs pipeline disable commands to the same degree as read

commands. SCD SRAMs pipeline deselect commands one stage

less than read commands. SCD RAMs begin turning off their

outputs immediately after the deselect command has been

captured in the input registers. DCD RAMs hold the deselect

command for one full cycle and then begin turning off their

outputs just after the second rising edge of clock. The user may

configure this SRAM for either mode of operation using the SCD

mode input.

• Single/Dual Cycle Deselect selectable

• IEEE 1149.1 JTAG-compatible Boundary Scan

• ZQ mode pin for user-selectable high/low output drive

• 2.5 V or 3.3 V +10%/–10% core power supply

• 2.5 V or 3.3 V I/O supply

• LBO pin for Linear or Interleaved Burst mode

• Internal input resistors on mode pins allow floating mode pins

• Byte Write (BW) and/or Global Write (GW) operation

• Internal self-timed write cycle

• Automatic power-down for portable applications

• JEDEC-standard 119-bump BGA package

Byte Write and Global Write

Byte write operation is performed by using Byte Write enable

Functional Description

(BW) input combined with one or more individual byte write

signals (Bx). In addition, Global Write (GW) is available for

writing all bytes at one time, regardless of the Byte Write control

inputs.

Applications

The GS88237AB is a 9,437,184-bit high performance

synchronous SRAM with a 2-bit burst address counter. Although

of a type originally developed for Level 2 Cache applications

supporting high performance CPUs, the device now finds

application in synchronous SRAM applications, ranging from

DSP main store to networking chip set support.

FLXDrive™

The ZQ pin allows selection between high drive strength (ZQ low)

for multi-drop bus applications and normal drive strength (ZQ

floating or high) point-to-point applications. See the Output Driver

Characteristics chart for details.

Controls

Addresses, data I/Os, chip enable (E1), address burst control

Sleep Mode

inputs (ADSP, ADSC, ADV), and write control inputs (Bx, BW,

GW) are synchronous and are controlled by a positive-edge-

triggered clock input (CK). Output enable (G) and power down

control (ZZ) are asynchronous inputs. Burst cycles can be initiated

with either ADSP or ADSC inputs. In Burst mode, subsequent

burst addresses are generated internally and are controlled by

ADV. The burst address counter may be configured to count in

either linear or interleave order with the Linear Burst Order (LBO)

input. The Burst function need not be used. New addresses can be

loaded on every cycle with no degradation of chip performance.

Low power (Sleep mode) is attained through the assertion (High)

of the ZZ signal, or by stopping the clock (CK). Memory data is

retained during Sleep mode.

Core and Interface Voltages

The GS88237AB operates on a 2.5 V or 3.3 V power supply. All

input are 3.3 V and 2.5 V compatible. Separate output power

(V_DDQ) pins are used to decouple output noise from the internal

circuits and are 3.3 V and 2.5 V compatible.

Parameter Synopsis

-250 -225 -200 -166 -150 -133 Unit

Pipeline

3-1-1-1

2.0 2.2 2.5 2.9 3.3 3.5 ns

4.0 4.4 5.0 6.0 6.7 7.5 ns

tCycle

3.3 V

2.5 V

Current 330 300 270 230 215 190 mA

Current 320 295 265 225 210 185 mA

Rev: 1.02 11/2004

1/28

Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.

12 3 4 5 6 7...28

中文翻译

下载PDF

与GS88237AGB-225I相关器件

型号	品牌	获取价格	描述	数据表
GS88237AGB-225T	GSI	获取价格	Cache SRAM, 256KX36, 2.2ns, CMOS, PBGA119, PLASTIC, BGA-119
GS88237AGB-250	GSI	获取价格	Cache SRAM, 256KX36, 2ns, CMOS, PBGA119, PLASTIC, BGA-119
GS88237AGB-250I	GSI	获取价格	Cache SRAM, 256KX36, 2ns, CMOS, PBGA119, PLASTIC, BGA-119
GS88237AGB-250IT	GSI	获取价格	Cache SRAM, 256KX36, 2ns, CMOS, PBGA119, PLASTIC, BGA-119
GS88237AGB-250T	GSI	获取价格	Cache SRAM, 256KX36, 2ns, CMOS, PBGA119, PLASTIC, BGA-119
GS88237BB	GSI	获取价格	256K x 36 9Mb SCD/DCD Sync Burst SRAM
GS88237BB-133	GSI	获取价格	SRAM
GS88237BB-133IT	GSI	获取价格	SRAM
GS88237BB-133T	GSI	获取价格	SRAM
GS88237BB-150IT	GSI	获取价格	SRAM

与GS88237AGB-225I相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

23
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

7
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

8
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

31

产品中心

服务支持

精选活动

关于我们

帮助中心

GS88237AGB-225I

GS88237AGB-225I 技术参数

GS88237AGB-225I 数据手册

与GS88237AGB-225I相关器件

与GS88237AGB-225I相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

GS88237AGB-225I

GS88237AGB-225I 技术参数

GS88237AGB-225I 数据手册

与GS88237AGB-225I相关器件

与GS88237AGB-225I相关文章

您还可以找

您在本页遇到什么问题？