GS1582
Multi-Rate Serializer with Cable Driver,
Audio Multiplexer and ClockCleaner™
GS1582 Data Sheet
Key Features
Description
•
HD-SDI, SD-SDI, DVB-ASI transmitter with audio
embedding
The GS1582 is the next generation multi-standard
serializer with an integrated cable driver. The device
provides robust parallel to serial conversion, generating
a SMPTE 292M/259M-C compliant serial digital output
signal. The integrated cable driver features an output
disable (high impedance) mode and an adjustable
signal swing. Data input is accepted in 20-bit parallel
format or 10-bit parallel format. An associated parallel
clock input must be provided at the appropriate
operating frequency; 74.25/74.1758/13.5MHz (20-bit
mode) or 148.5/148.352/27MHz (10-bit mode).
•
Integrated SMPTE 292M and 259M-C compliant
cable driver
™
•
•
Integrated ClockCleaner
User selectable video processing features,
including:
•
Generic ancillary data insertion
•
•
•
Support for HVF or EIA/CEA-861 timing input
Automatic standard detection and indication
The GS1582 features an internal PLL which, if desired,
can be configured for a loop bandwidth below 100kHz.
When used in conjunction with the GO1555 Voltage
Controlled Oscillator, the GS1582 can tolerate well in
excess of 300ps jitter on the input PCLK and still
provide output jitter within SMPTE specifications.
Enhanced SMPTE 352M payload identifier
generation and insertion
•
TRS, CRC, ANC data checksum, and line
number calculation and insertion
•
•
•
EDH packet generation and insertion
Illegal code remapping
In addition to serializing the input, the GS1582 performs
NRZ-to-NRZI encoding and scrambling as per SMPTE
292M/259M-C when operating in SMPTE mode. When
operating in DVB-ASI mode, the device will insert K28.5
sync characters and 8b/10b encode the data prior to
serialization. The device also provides a range of other
data processing functions. All processing features are
optional and may be enabled/disabled via external
control pin(s) and/or host interface programming.
SMPTE 292M and SMPTE 259M-C compliant
scrambling and NRZ → NRZI encoding
•
Blanking of input HANC and VANC space
•
User selectable audio processing features,
including:
•
SMPTE 299M and SMPTE 272M-A/C compliant
audio embedding
•
•
Support for up to 8 channels
The GS1582 can embed up to 8 channels of audio into
the video data stream in accordance with SMPTE 299M
and SMPTE 272M. The audio input signal formats
Support for audio group replacement
•
•
•
•
JTAG test interface
2
supported by the device include AES/EBU and I S
1.8V core and 3.3V charge pump power supply
1.8V and 3.3V digital I/O support
Low power standby mode
serial digital formats with a 16, 20 or 24 bit sample size
and a 48 kHz sample rate. Additional audio processing
features include individual channel enable, channel
swap, group swap, ECC generation and audio channel
status insertion.
o
o
•
•
Operating temperature range: -20 C to +85 C
Pb-free, RoHS compliant, 11mm x 11mm 100-ball
BGA package
Typical power consumption, including the GO1555
VCO, is 500mW. The standby feature allows the power
to be reduced to 125mW. Power may be reduced to less
than 10mW by also removing the power to the cable
driver and eliminating transitions at the parallel data and
clock inputs.
Applications
•
SMPTE 292M and SMPTE 259M-C Serial Digital
Interfaces
•
DVB-ASI Serial Digital Interfaces
The GS1582 is Pb-free and RoHS compliant.
40117 - 1 November 2007
1 of 114
www.gennum.com