Miniature Slides for High Frequency Series FS
Distinctive Characteristics
For high frequency (DC through 1GHz): Isolation 40dB minimum at 1GHz.
Insertion loss 0.5dB maximum at 1GHz.
Impedance 75 ohms
Actual Size
with Tall Actuator
Innovative alternative to relay products
Highly reliable, self-cleaning twin contact mechanism with gold plating
Long total travel of .138” (3.5mm) for highly visible actuator position
Distinct audible and tactile feedback during actuation
Suited to high frequency applications (90MHz to 1GHz) such as CATV and
communication equipment
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
RF Ratings
Impedance:
Insertion Loss:
Isolation:
75 ohms
0.5dB maximum @ 1GHz
40dB minimum @ 1GHz
Other Ratings
Contact Resistance:
200 milliohms maximum
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
250 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
1,000 operations minimum
1,000 operations minimum
Nonshorting (break-before-make)
.138” (3.5mm)
Contact Timing:
Total Travel:
Environmental Data
Operating Temp Range:
Humidity:
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 5 minutes; 3 right angled directions for 2 hours
Shock:
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Soldering Time & Temp:
Wave Soldering: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07