5秒后页面跳转
FMGA-461Z/ES PDF预览

FMGA-461Z/ES

更新时间: 2024-11-29 02:55:31
品牌 Logo 应用领域
CRANE 输入元件LTE
页数 文件大小 规格书
6页 185K
描述
EMI INPUT FILTER 28 VOLT INPUT SURFACE MOUNT

FMGA-461Z/ES 技术参数

生命周期:Contact ManufacturerReach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8504.50.80.00
风险等级:5.5最大直流电阻:1.2 Ω
滤波器类型:DATA LINE FILTER高度:6.35 mm
JESD-609代码:e4长度:25.65 mm
安装类型:SURFACE MOUNT功能数量:1
端子数量:18最高工作温度:125 °C
最低工作温度:-55 °C包装材料:METAL
物理尺寸:L25.65XB22.35XH6.35 (mm)/L1.01XB0.88XH0.25 (inch)额定电流:0.8 A
额定电压:40 V子类别:Data Line Filters
端子面层:GOLD宽度:22.35 mm
Base Number Matches:1

FMGA-461Z/ES 数据手册

 浏览型号FMGA-461Z/ES的Datasheet PDF文件第2页浏览型号FMGA-461Z/ES的Datasheet PDF文件第3页浏览型号FMGA-461Z/ES的Datasheet PDF文件第4页浏览型号FMGA-461Z/ES的Datasheet PDF文件第5页浏览型号FMGA-461Z/ES的Datasheet PDF文件第6页 
FEATURES  
FMGA EMI FILTER  
0.8 AMP  
EMI INPUT  
F
ILTER  
NPUT  
URFACE MOUNT  
• –55°C to +125°C operation  
• 50 dB min. attenuation at 500 kHz  
differential mode  
28 VOLT  
I
• 45 dB min. attenuation at 5MHz  
common mode  
S
• Compliant to MIL-STD-461C, CE03  
• Compatible with MIL-STD-704A  
through E  
MODEL  
FMGA-461  
0.8 amp  
Size (max.): 1.010 x 0.880 x 0.250 inches (25.65 x 22.35 x 6.35 mm)  
Shown with “Gull Wing” lead option, also available with straight  
leads. See Section B8, case B, for dimensions and options.  
Weight:  
10.3 grams typical, 11.5 grams maximum  
Screening: Standard or ES. See Section C2 for screening options, see  
Section A5 for ordering information.  
DESCRIPTION  
microseconds. The damping circuit can be used with a 1.50  
resistor in series with the filter’s positive input where the additional  
line loss can be tolerated. For transients with rise times of greater  
than 200 microseconds, there is no overshoot and the damping  
circuit is not required.  
Interpoint’s surface mount FMGA-461™ EMI filter has been  
designed to work with Interpoint’s surface mount MGA and MGH  
Series DC/DC converters. Multiple MGA or MGH Series converters  
can be operated from a single FMGA filter provided the total power  
line current does not exceed the filter’s maximum rating. The FMGA  
filter will reduce the converter’s power line reflected ripple current to  
within the limit of MIL-STD-461C, Method CE03 as shown in Figures  
4 through 7. The filter uses only ceramic capacitors for reliable high-  
temperature operation.  
SURFACE MOUNT PACKAGE  
The FMGA EMI filter can be surface mounted with pick-and-place  
equipment or manually. It is recommended that the case be  
attached with flexible epoxy adhesive or silicone which is thermally  
conductive (>1 watt /meter/°K).  
CONNECTION AND OPERATION  
Where more than one pin has the same designation (e.g. pins 7, 8,  
and 9 are Positive Output), all of those pins must be connected for  
output performance to meet the specifications.  
Internal components are soldered with SN96 (melting temperature  
221°C) to prevent damage during reflow. Maximum reflow tempera-  
ture for surface mounting the FMGA filter is 220°C for a maximum  
of 30 seconds. SN60, 62, or 63 are the recommended types of  
solder. Hand soldering should not exceed 300°C for 10 seconds per  
pin.  
The MGA Series has an internal 2 µF capacitor its input terminals  
and the MGH Series has an internal 0.47 µF capacitor across its  
input power terminals. When the MGA or MGH converters are used  
with the FMGA filter, this capacitor becomes part of the filter and  
forms its final LC output section. When 2 or 3 MGA or MGH  
converters are used with a single filter, this capacitor becomes  
larger, improving the rejection versus frequency.  
The hermetically sealed metal cases are available in two different  
lead configurations. See Section B8, case B.  
LAYOUT REQUIREMENTS  
The case of the filter must be connected to the case of the converter  
through a low impedance connection to minimize EMI.  
TRANSIENT DAMPING  
The optional damping circuit shown in Figure 2 will prevent filter  
overshoot caused by 80 V transients with rise times of less than 200  
B3-21  

与FMGA-461Z/ES相关器件

型号 品牌 获取价格 描述 数据表
FMG-G26S SANKEN

获取价格

Ultra-Fast-Recovery Rectifier Diodes
FMG-G26S ALLEGRO

获取价格

Rectifier Diode, 1 Phase, 1 Element, 4A, 600V V(RRM), Silicon, TO-220, TO-220F, 2 PIN
FMG-G2CS SANKEN

获取价格

Ultra-Fast-Recovery Rectifier Diodes
FMG-G36S SANKEN

获取价格

Ultra-Fast-Recovery Rectifier Diodes
FMG-G3CS SANKEN

获取价格

Ultra-Fast-Recovery Rectifier Diodes
FMH06N90E FUJI

获取价格

N-CHANNEL SILICON POWER MOSFET
FMH07N70E FUJI

获取价格

TO-3P(Q)
FMH07N90E FUJI

获取价格

N-CHANNEL SILICON POWER MOSFET
FMH09N70E FUJI

获取价格

TO-3P(Q)
FMH09N90E FUJI

获取价格

N-CHANNEL SILICON POWER MOSFET