High Reliability
1. Description
– Endurance: 100,000 program/erase cycles
– Data retention: 20 years
Green Package
The FM25W01 is a 1M-bit (128K-byte) Serial Flash
memory,
with
advanced
write protection
– 8-pin SOP (150mil)
– 8-pin TSSOP
– 8-pin USON (0.45mm)
– Thin 8-ball TWLCSP
– All Packages are RoHS Compliant and Halogen-
free
mechanisms. The FM25W01 supports the standard
Serial Peripheral Interface (SPI), Dual/Quad I/O as
well as 2-clock instruction cycle Quad Peripheral
Interface(QPI). They are ideal for code shadowing to
RAM, executing code directly from Dual/Quad SPI
(XIP) and storing voice, text and data.
The FM25W01 can be programmed 1 to 256 bytes
at a time, using the Page Program instruction. It is
designed to allow either single Sector/Block at a
time or full chip erase operation. The FM25W01
can be configured to protect part of the memory as
the software protected mode. The device can
sustain a minimum of 100K program/erase cycles on
each sector or block.
3. Packaging Type
SOP 8 (150mil)
CS#
VCC
8
7
1
2
DO(DQ1)
HOLD#(DQ3)
CLK
3
4
6
5
WP#(DQ2)
VSS
DI(DQ0)
2. Features
TSSOP8
1M bit of Flash memory
VCC
– 32 uniform sectors with 4K-byte each
– 2 uniform blocks with 64K-byte each or
– 4 uniform blocks with 32K-byte each
– 256 bytes per programmable page
8
7
6
5
CS#
1
2
DO(DQ1)
HOLD#(DQ3)
CLK
3
WP#(DQ2)
DI(DQ0)
4
VSS
Wide Operation Range
USON8 (0.45mm)
– 1.65V~3.6V single voltage supply
– Industrial temperature range
1
2
3
4
8
CS#
VCC
HOLD#(DQ3)
CLK
DI(DQ0)
7
DO(DQ1)
WP#(DQ2)
VSS
Serial Interface
6
5
– Standard SPI: CLK, CS#, DI, DO, WP#
– Dual SPI: CLK, CS#, DQ0, DQ1, WP#
– Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3
– QPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3
– Continuous READ mode support
– Allow true XIP(execute in place) operation
4. Pin Configurations
PIN PIN
NO. NAME
I/O
FUNCTION
High Performance
– Max FAST_READ clock frequency: 100MHz
– Max READ clock frequency: 50MHz
– Typical page program time: 0.5ms
– Typical sector erase time: 80ms
– Typical block erase time: 250/400ms
– Typical chip erase time: 1s
1
CS#
DO
(DQ1)
WP#
(DQ2)
VSS
DI
(DQ0)
CLK
HOLD#
(DQ3)
VCC
2
3
4
5
6
7
Low Power Consumption
– Typical Deep Power Down current: <1μA
Security
– Software and hardware write protection
– Lockable4X256-Byte OTP security Pages
– 64-Bit Unique ID for each device
– Discoverable parameters(SFDP) register
8
Note:
1 DQ0 and DQ1 are used for Dual SPI instructions.
2 DQ0 – DQ3 are used for Quad SPI and QPI instructions.
Datasheet
FM25W01 1M-BIT SERIAL FLASH MEMORY
Ver.0.2
3