FEP16AT THRU FEP16JT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts
Forward Current - 16.0 Amperes
TO-220AB
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
0.185 (4.70)
0.175 (4.44)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
0.055 (1.39)
0.045 (1.14)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
♦ Low forward voltage, high current capability
♦ High surge current capability
♦ Superfast recovery times for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
0.560 (14.22)
0.530 (13.46)
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.625 (15.87)
PIN
1.148 (29.16)
1.118 (28.40)
2
1
3
0.110 (2.79)
0.100 (2.54)
0.160 (4.06)
0.140 (3.56)
0.560 (14.22)
0.530 (13.46)
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body over
passivated chips
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.022 (0.56)
0.014 (0.35)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
PIN 2
PIN 1
PIN 3
Polarity: As marked
Mounting Position: Any
CASE
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
Dimensions are in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
FEP
FEP
16BT
FEP
16CT
FEP
16DT
FEP
FEP
FEP
16HT
FEP
16JT UNITS
SYMBOLS 16AT
16FT 16GT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
150 200 300 400
105 140 210 280
150 200 300 400
500
350
500
600 Volts
420 Volts
600 Volts
Maximum DC blocking voltage
100
Maximum average forward rectified current
at TC=100°C
I(AV)
16.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
200.0
Amps
Maximum instantaneous forward voltage per leg
at 8.0A
VF
IR
0.95
35.0
1.3
1.5
Volts
Maximum DC reverse current
at rated DC blocking voltage per leg
TC=25°C
TC=100°C
10.0
500.0
µA
Maximum reverse recovery time (NOTE 1)
per leg
trr
50.0
ns
pF
Typical Junction Capacitance per leg (NOTE 2)
Typical thermal resistance (NOTE 3)
CJ
85.0
60.0
RΘJA
RΘJC
15.0
2.2
°C/W
°C
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink
4/98