Bipolar IC
For Power Factor Correction
FFAA53351P3(M3)/F1A5P332(PM(M))/FA5332P(M)
■ Description
■ Dimensions, mm
FA5331P(M) and FA5332P(M) are control ICs for a power
factor correction system. These ICs use the average current
control system to ensure stable operation. With this system, a
power factor of 99% or better can be achieved.
Á SOP-16
9
16
FA5331P(M) is a 1st generation IC and FA5332P(M) is 2nd
generation IC which light-load characteristics are improved.
■ Features
8
1
10.06
• Drive circuit for connecting a power MOS-FET(Io=±1.5A)
• Pulse-by-pulse overcurrent and overvoltage limiting function
• Output ON/OFF control function by external signals
• External synchronizing signal terminal for synchronous
operation with other circuits
0.7
0.40±0.1
1.27±0.2
• Undervoltage malfunction prevention function
• Low standby current (90µA typical) for simple start-up circuit
• 16-pin package (DIP/SOP)
Á DIP-16
FA5331P
• ±2% accuracy reference voltage for setting DC output and
overvoltage protection [FA5332P(M) only]
• When there is a possibility of light-load operation,
FA5332P(M) is suitable.
16
9
■ Block diagram
1
8
19.4
1.5
0.81
7.6
0.5±0.1
2.54±0.25
FA5332P
9
16
1
8
19.2
1.3
0.71
Pin Pin
Description
No. symbol
1
IFB
Current error amplifier output
Inverting input to current error amplifier
Multiplier input
2
IIN–
VDET
OVP
VFB
VIN–
GND
OUT
VC
7.62
3
0.48±0.1
2.54±0.25
4
Overvoltage protection input
Voltage error amplifier output
Inverting input to voltage error amplifier
Ground
5
6
7
8
Output
9
Power supply to output circuit
Power supply
10
11
12
13
14
15
16
VCC
CS
Soft-start
ON/OFF Output ON/OFF control input
REF
SYNC
CT
Reference voltage
Oscillator synchronization input
Oscillator timing capacitor and resistor
Non-inverting input to current error amplifier
IDET
1