High Linearity Broadband SP2T
5MHz to 10GHz
F2972
Datasheet
Description
Features (75ꢀ)
The F2972 is a singleꢀpole doubleꢀthrow (SP2T) reflective RF
switch featuring high linearity and wide bandwidth. This device is
optimized from 5MHz to 1.8GHz to support downstream cable
modem future migration for DOCSIS 3.1 applications, and operates
at up to 10GHz to support a multitude of wireless RF applications.
Superb performance is achieved when used in either 50ꢁ or 75ꢁ
terminating impedance applications.
ꢀ
Low insertion loss:
ꢀ
ꢀ
0.23dB at 204MHz
0.34dB at 1.8GHz
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
High Isolation: 40dB at 1.8GHz
P0.1dB compression of +37dBm at 204MHz
Second Harmonic: ꢀ100dBc at 204MHz
Third Harmonic: ꢀ120dBc at 204MHz
Composite Second Order Distortion > 100dBc
Composite Triple Beat Distortion > 100dBc
The F2972 uses a single positive supply voltage of either +3.3V or
+5.0V and is compatible with either 1.8V or 3.3V control logic.
Competitive Advantage
The F2972 provides extremely low insertion loss across the entire
bandwidth while providing superb distortion performance.
Features (50ꢀ)
ꢀ
Low insertion loss:
ꢀ
ꢀ
0.40dB at 2.4GHz
0.55dB at 8GHz
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Optimized for DOCSIS 3.1 applications up to 1.8GHz
Optimized for WiꢀFi applications up to 5.9GHz
Low insertion loss
High isolation
Fast switching
ꢀ
ꢀ
High Isolation:
ꢀ
34dB at 2.4GHz
High Linearity:
ꢀ
ꢀ
IIP2 +125dBm at 2.4GHz
IIP3 +77dBm at 2.4GHz
No external matching required
ꢀ
ꢀ
ꢀ
P0.1dB compression of +40dBm at 2.4GHz
Second Harmonic: ꢀ100dBc at 2.4GHz
Third Harmonic: ꢀ110dBc at 2.4GHz
Typical Applications
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Broadband cable DOCSIS 3.0 / 3.1
Set top box
CATV filter bank switching
WiꢀFi
Cellular BTS
Block Diagram
Figure 1. Block Diagram
General purpose
General Features
ꢀ
ꢀ
ꢀ
Supply voltage: +2.5V to +5.25V
1.8V and 3.3V compatible control logic
2mm x 2mm, 12ꢀpin TQFN package
© 2017 Integrated Device Technology, Inc.
1
Rev O April 19, 2017