Datasheet > EVAL-SSM2335Z

EVAL-SSM2335Z

更新时间： 2024-11-24 06:58:07

品牌	Logo	应用领域
亚德诺 - ADI		音频放大器
页数	文件大小	规格书
16页	584K
描述
Filterless, High Efficiency, Mono 3 W Class-D Audio Amplifier

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

EVAL-SSM2335Z 数据手册

Filterless, High Efficiency,

Mono 3 W Class-D Audio Amplifier

SSM2335

The SSM2335 features a high efficiency, low noise modulation

scheme that requires no external LC output filters. The modu-

lation continues to provide high efficiency even at low output

power. It operates with 93% efficiency at 1.4 W into 8 Ω or 85%

efficiency at 3 W into 3 Ω from a 5.0 V supply and has an SNR

of >96 dB. Spread-spectrum pulse density modulation is used

to provide lower EMI-radiated emissions compared with other

Class-D architectures.

FEATURES

Filterless Class-D amplifier with Σ-Δ modulation

No sync necessary when using multiple Class-D amplifiers

from Analog Devices, Inc.

3 W into 3 Ω load and 1.4 W into 8 Ω load at 5.0 V supply

with <1% total harmonic distortion (THD + N)

93% efficiency at 5.0 V, 1.4 W into 8 Ω speaker

>96 dB signal-to-noise ratio (SNR)

Single-supply operation from 2.5 V to 5.5 V

20 nA ultralow shutdown current

Short-circuit and thermal protection

Available in 9-ball, 1.5 mm × 1.5 mm WLCSP

Pop-and-click suppression

Built-in resistors reduce board component count

Default fixed 18 dB or user-adjustable gain setting

The SSM2335 has a micropower shutdown mode with a typical

shutdown current of 20 nA. Shutdown is enabled by applying

a logic low to the

pin.

The device also includes pop-and-click suppression circuitry.

This suppression circuitry minimizes voltage glitches at the

output during turn-on and turn-off, reducing audible noise

on activation and deactivation.

APPLICATIONS

Mobile phones

MP3 players

Portable gaming

Portable electronics

Educational toys

The fully differential input of the SSM2335 provides excellent

rejection of common-mode noise on the input. Input coupling

capacitors can be omitted if the input dc common-mode voltage

is approximately V_DD/2.

The default gain of the SSM2335 is 18 dB, but users can reduce the

gain by using a pair of external resistors (see the Gain section).

GENERAL DESCRIPTION

The SSM2335 is specified over the industrial temperature range

of −40°C to +85°C. It has built-in thermal shutdown and output

short-circuit protection. It is available in a 9-ball, 1.5 mm ×

1.5 mm wafer level chip scale package (WLCSP).

The SSM2335 is a fully integrated, high efficiency, Class-D audio

amplifier. It is designed to maximize performance for mobile

phone applications. The application circuit requires a minimum

of external components and operates from a single 2.5 V to 5.5 V

supply. It is capable of delivering 3 W of continuous output power

with <1% THD + N driving a 3 Ω load from a 5.0 V supply.

FUNCTIONAL BLOCK DIAGRAM

0.1µF

10µF

VBATT

2.5V TO 5.5V

VDD

SSM2335

160kΩ

47nF*

20kΩ

IN+

IN–

OUT–

OUT+

AUDIO IN+

AUDIO IN–

MODULATOR

FET

DRIVER

(Σ-Δ)

47nF*

160kΩ

INTERNAL

OSCILLATOR

POP-AND-CLICK

SUPPRESSION

BIAS

SHUTDOWN

GND

*INPUT CAPACITORS ARE OPTIONAL IF INPUT DC COMMON-MODE

VOLTAGE IS APPROXIMATELY V /2.

Figure 1.

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registeredtrademarks arethe property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Fax: 781.461.3113

www.analog.com

12 3 4 5 6 7...16

中文翻译

下载PDF

与EVAL-SSM2335Z相关器件

型号	品牌	获取价格	描述	数据表
EVAL-SSM2356Z	ADI	获取价格	2 × 2W Filterless Class-D Stereo Audio Amplif
EVAL-SSM2377Z	ADI	获取价格	Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
EVAL-SSM2518Z	ADI	获取价格	Digital Input Stereo, 2 W, Class-D
EVAL-SSM2537Z	ADI	获取价格	PDM Digital Input, Mono 2.7 W Class-D Audio Amplifier
EVAL-SSM2804Z	ADI	获取价格	Audio Subsystem with Class-D Speaker
EVAL-SSM2932Z	ADI	获取价格	High Efficiency, Ground-Referenced
EVAL-SSM3302Z	ADI	获取价格	2 Ã10 W Filterless Class-D
EVAL-SSM4321Z	ADI	获取价格	BOARD EVAL FOR SSM4321
EVAL-SSM4567MINIZ	ADI	获取价格	Digital 2.5 W, 5.1 V, Boost Class-D Audio Amplifier with Output Sensing
EVAL-SSM4567Z	ADI	获取价格	Digital 2.5 W, 5.1 V, Boost Class-D Audio Amplifier with Output Sensing

与EVAL-SSM2335Z相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

39
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

31
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

59
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

55

产品中心

服务支持

精选活动

关于我们

帮助中心

EVAL-SSM2335Z

EVAL-SSM2335Z 数据手册

与EVAL-SSM2335Z相关器件

与EVAL-SSM2335Z相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

EVAL-SSM2335Z

EVAL-SSM2335Z 数据手册

与EVAL-SSM2335Z相关器件

与EVAL-SSM2335Z相关文章

您还可以找

您在本页遇到什么问题？