PRELIMINARY TECHNICAL DATA
EvaluationBoard
AD1555/AD1556 24-Bit ⌺-⌬ ADC
a
Preliminary Technical Data
EVAL-AD1555/56EB
FEATURES :
The EVAL-AD1555/56EB is ideal for use either as a stand-
alone evaluation board to interface with a customer applica-
tion or with any compatible PC using the parallel printer port.
On-Board Reference, Oscillator, Control Logic and
Buffers
Easy interface to printer port of PC
PC Software for Control and Data Analysis
Stand Alone Capability to ease design
Analog and Digital Prototype Area
On-board components include an AD780 3V ultra low noise
bandgap reference, a crystal oscillator, and digital control
logic. The board has both a Centronics male connector to
interface with PC printer port and a 50-pin connector for
stand-alone operation.
Software is provided to allow simple demonstration and
evaluation of the AD1555/AD1556 chip-set.
GENERAL DESCRIPTION
The EVAL-AD1555/56EB is an evaluation board for the
AD1555 and AD1556 24-bit ⌺-⌬ ADC chip-set. The
AD1555/AD1556 chip-set can convert a high dynamic range
input signal, operates from +5V and -5V supplies and uses a
serial interface.
The AD1555/AD1556 evaluation board is designed to
demonstrate the ADC's performance and operation. A full
description of the AD1555/AD1556 is available in the
AD1555/AD1556 data sheet and should be consulted when
utilizing this evaluation board.
FUNCTIONAL BLOCK DIAGRAM
SJ3
SJ2
SJ1
+5V
- 5V
+5V
+5V
oscillator
Ref
AD1555
Ain
FPGA
Σ∆
mod
PGA
25-WAY D-Type
connector
AD1556
Tin
PGA_MOD
50-Way connector
REV. PrD
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for
itsuse,norforanyinfringementsofpatentsorotherrightsofthirdparties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106, U.S.A.
Tel: 617/329-4700 Fax: 617/326-8703