ETA6281
Programmable Current-Limited Load Switch
DESCRIPTION
FEATURES
ETA6281 is a load switch which provides full protection to Wide Input Voltage Range: 2.1V to 6V
systems and loads which may encounter large current 7.5V Input Standoff Voltage
conditions. ETA6281 offers a 70mΩ current-limited switch 6.1V OVP
which can operate over an input voltage range of 2.1-6V. Up to 2.2A Max Load Current
The current limit can be externally programmed by a Programmable Current Limit: 75mA to 2200mA
precision resistor, ranging from 75mA to 2.2A. Current is Accurate Current Limit Threshold at 1.7A: +/-5%
prevented from flowing when the switch is off and the output Fast Over Current Response
voltage is higher than the input voltage. ETA6281 also Fault Flag Output: nFAULT Pin
features thermal shutdown protection which shuts off the Reversed Input-Output Current Blocking
switch to prevent damage to the part when a continuous Thermal Shutdown, UVLO Protection
over-current condition causes excessive heating. When the Tiny SOT23-5, SOT23-6, DFN2x2-6 Package
switch current reaches the current limit, the parts operate in
a constant-current mode to prohibit excessive currents from
causing damage. The ETA6281 will not turn off after a
APPLICATIONS
current limit fault, but will rather remain in the constant
current mode indefinitely. The nFAULT output asserts low
during over-current and reverse-voltage conditions.
ETA6281 is available in three types of package: SOT23-5,
SOT23-6, DFN2x2-6.
USB Ports and Hubs
Digital TVs
Set-Top Boxes
VOIP Phones
TYPICAL APPLICATION
VIN
IN
OUT
VOUT
100K
4.7uF
ETA6281
10uF
FAULT
nEN
nFAULT
ILIM
Rilim
nEN
GND
PART No.
PACKAGE
TOP MARK
Pcs/Reel
ORDERING INFORMATION
ETA6281S2F
ETA6281S2G
ETA6281D2G
SOT23-5
SOT23-6
DFN2x2-6
HH|YW
HH|YW
HH|YW
3000
3000
3000
www.etasolution.com
1
Empower, Transcend, Achieve!