ETA6963
I2C Controlled 13.5V/3A, 1-Cell Battery Charger with Power Path
Management and USB Charger Detection
DESCRIPTION
FEATURES
ETA6963 is a highly-integrated 3A switch-mode battery
charge and system power path management device for
single cell Li-Ion and Li-polymer battery. It features fast
charging with high input voltage support for a wide range
of smart phones, tablets and portable devices. Its low
impedance power path optimizes switch-mode
operation efficiency, reduces battery charging time and
extends battery life. Its input voltage and current
regulation deliver maximum charging power. The
solution is highly integrated with input reverse-blocking
FET, high/low-side switching FET, and battery FET. It
also integrates the bootstrap diode for the high-side gate
drive. The I2C serial interface with charging and system
settings makes the device a truly flexible solution. The
device supports a wide range of input sources. The
device is compliant with USB 2.0 and USB 3.0 power
spec with input current and voltage regulation. The
device also meets USB On-the-Go (OTG) operation
power rating specification by supplying 5.15 V on BUS
pin with constant current limit up to 1.2A.The power path
management regulates the system slightly above
battery voltage but does not drop below 3.5 V minimum
system voltage (programmable). With this feature, the
system maintains operation even when the battery is
completely depleted or removed. When the input current
limit or voltage limit is reached, the power path
management automatically reduces the charge current
to zero. As the system load continues to increase, the
power path discharges the battery until the system
power requirement is met. This Supplement Mode
prevents overloading the input source.
High-Efficiency, 1.5MHz, Synchronous Switching
Buck Charger
90% Charge Efficiency at 2A from 5V Input
Programmable PFM Mode for Light Load
Conditions
Supports USB On-The-Go (OTG)
Programmable Current Limit Boost
Converter with Up to 1.2A Output
Wide Range Single Input to Support both USB
Input and High Voltage Adapters
Support 3.9V to 13.5V Input Voltage Range
With 22V Absolute Maximum Input Voltage
Rating
Programmable Input Current Limit (100mA to
3.2A With 100mA Resolution)
Auto Detect USB BC1.2, SDP, CDP, DCP
and Non-Standard Adaptors
Narrow VDC (NVDC) Power Path Management
BATFET Control to Support Ship Mode, Wake Up
and Full System Reset
Flexible Autonomous and I2C Mode for Optimal
System Performance
High Integration Includes All MOSFETs, Current
Sensing and Loop Compensation
Safety
Battery Temperature Sensing for Charge
and Boost Mode
Thermal Regulation and Thermal Shutdown
Input UVLO and Overvoltage Protection
APPLICATIONS
The ETA6963 is available in a QFN4x4-24L package.
Tablet PC, Smart Phone, Internet Devices
Portable Audio Speaker, Handheld Computers,
PDA, POS
www.etasolution.com
ETA6963_V1.7
1
Empower, Transcend, Achieve!