ePVP6810
VFD Controller
1 General Description
The ePVP6810 is an 8-bit RISC type vacuum fluorescent display (VFD) controller equipped
with low power consumption and high speed CMOS technology. This integrated single chip
features on_chip watchdog timer (WDT), one time programming ROM (OTP), data RAM,
programmable real time clock/counter, internal interrupt, power down mode, 10-bit A/D
converter, IR detector, and high voltage output for VFD application.
2. Feature
2.1 CPU
:
ꢁ Clock source Crystal Oscillator
ꢁ Crystal Oscillator (32.768KHz): with a external crystal
ꢁ 4k x 13 on chip Program ROM.
ꢁ 128 x 8 on chip data RAM
ꢁ 144 x 8 general purpose registers
ꢁ 16 level stack for subroutine nesting
ꢁ 5 channel 8-bit counters: real time clock/counter (TCC) ,COUNTER1, COUNTER3,
COUNTER4, COUNTER5
ꢁ 1 channel 16-bit counter: COUNTER2
ꢁ On-chip watchdog timer (WDT)
%
ꢁ 99.9 single instruction cycle commands
ꢁ Four operation modes
Mode
CPU Status
Main Clock
32.768kHz Clock
Status
Description
RA(6) = 0
RA(7) = 0 + "SLEP" instruction
RA(6) = 0
Sleep mode
Idle mode
Turn off
Turn off
Turn off
Turn off
Turn off
Turn on
RA(7) = 1 +"SLEP" instruction.
Green mode
Normal mode
Turn on
Turn on
Turn off
Turn on
Turn on
Turn on
RA(6) = 0
RA(6) = 1
* Main clock can be programmed from 447.829k to 17.91MH by internal PLL
* 8 main clocks: 447.829K, 895.658K, 1.791M , 3.582M , 7.165M , 10.747M ,
14.331M and 17.91MHz
ꢁ 12 interrupt source, 5 external (IR , INT1~INT4 ), 8 internal ( ADC, TCC, COUNTER1~5)
2.2 GPIO
ꢁ GPIO 9 Port(8 bit): general purpose input/output; LED output ; interrupt function
ꢁ GPIO B Port(7 bit): general purpose input/output for power down/MPEG power/Reset
control
ꢁ GPIO C Port(4 bit): general purpose input/output for switch and key scanning (6x4 matrix)
2.3 ADC
This specification is subject to change without further notice.
11.28.2004 (V1.23) 1 of 50