Ordering number : ENN7159
CMOS IC
LC75813E, 75813T
1/3, 1/4 Duty General-Purpose LCD Driver
Overview
Features
The LC75813E and LC75813T are 1/3 duty and 1/4 duty
general-purpose LCD drivers that can be used for
frequency display in electronic tuners under the control of
a microcontroller. The LC75813E and LC75813T can
drive an LCD with up to 344 segments directly. The
LC75813E and LC75813T can also control up to 8
general-purpose output ports. Since the LC75813E and
LC75813T use separate power supply systems for the
LCD drive block and the logic block, the LCD driver
block power-supply voltage can be set to any voltage in
the range 2.7 to 6.0 volts, regardless of the logic block
power-supply voltage.
• Switching between 1/3 duty and 1/4 duty drive
techniques under serial data control.
• Switching between 1/2 bias and 1/3 bias drive
techniques under serial data control.
• Up to 261 segments for 1/3 duty drive and 344 segments
for 1/4 duty drive can be displayed.
• Serial data input supports CCB format communication
with the system controller.
• Serial data control of the power-saving mode based
backup function and all the segments forced off
function.
• Serial data control of switching between the segment
output port and the general-purpose output port
functions.
Specifications
Absolute Maximum Ratings at Ta = 25°C, V = 0 V
SS
Parameter
Maximum supply voltage
Symbol
DD max
LCD max VLCD
Conditions
Ratings
–0.3 to +7.0
–0.3 to +7.0
–0.3 to +7.0
–0.3 to VDD + 0.3
–0.3 to VLCD + 0.3
–0.3 to VDD + 0.3
–0.3 to VLCD + 0.3
300
Unit
V
V
VDD
V
VIN1
VIN2
VIN3
CE, CL, DI, INH
OSC
Input voltage
Output voltage
Output current
V
VLCD1, VLCD
2
VOUT
1
2
OSC
V
VOUT
S1 to S87, COM1 to COM4, P1 to P8
IOUT1
IOUT2
IOUT3
S1 to S87
µA
mA
COM1 to COM4
P1 to P8
3
5
Allowable power dissipation
Operating temperature
Storage temperature
Pd max
Topr
Ta = 85°C
200
mW
°C
–40 to +85
–55 to +125
Tstg
°C
•
•
CCB is a trademark of SANYO ELECTRIC CO., LTD.
CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
http://semicon.sanyo.com/en/network
20102RM (OT) No. 7159-1/26