10.Adhesive Strength of Terminal Electrodes
Specified Value
No terminal separation or its indication.
Temperature Compensating(High Frequency type)
Applied force
Duration
: 2N
: 10±5sec.
Test Methods and
Remarks
High permittivity
Applied force
Duration
: 5N
: 30±5sec.
11.Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder
Eutectic solder
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Solder type
H60A or H63A
230±5℃
Test Methods and
Remarks
Solder temperature
Duration
4±1 sec.
12.Resistance to Soldering
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change
Insulation resistance
Withstanding voltage
: C※≦10pF :±0.25pF C※>10pF :±2.5% ※Normal capacitance
: Initial value
(between terminals) : No abnormality
Specified Value
High permittivity
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: Within±15%(HMK,HMJ), ±10%(QMK,QMJ, SMK,SMJ)
: Inital value
: Initial value
(between terminals) : No abnormality
Preconditioning
Solder temperature
Duration
: Thermal treatment(at 150℃ for 1hr) Note1 (Only High permittivity)
: 270±5℃
: 3±0.5sec.
Test Methods and
Remarks
Preheating conditions
Recovery
: 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
: 24±2hrs under the stadard condition Note3
13.Temperature Cycle (Thermal Shock)
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
Insulation resistance
Withstanding voltage
: C※≦10pF :±0.25% C※>10pF :±2.5%
: Initial value
(between terminals) : No abnormality
Specified Value
High permittivity
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: Within±15%(HMK,HMJ), ±7.5%(QMK,QMJ, SMK,SMJ)
: Initial value
: Initial value
(between terminals) : No abnormality
Preconditioning : Thermal treatment (at 150℃ for 1hr) Note1
Conditions for 1 cycle
Step
temperature(℃)
Minimum operating temperature
Normal temperature
Time(min.)
1
2
3
4
30±3min.
2 to 3min.
30±3min.
2 to 3min.
Test Methods and
Remarks
Maximum operating temperature
Normal temperature
Number of cycles : 5 times
Recovery : 24±2hrs under the standard condition Note3
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01