MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105℃
LXY P161
Lower Z
LXVSeries
LXV
Low impedance
Endurance with ripple current : 2,000 to 5,000 hours at 105
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・
・
・
・
Lower Z
Longer life
KMG P129
℃
RoHS Compliant
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-
55 to +105℃
Rated Voltage Range 6.3 to 100Vdc
Capacitance Tolerance ±20% (M)
(at 20℃, 120Hz)
µ
Leakage Current
I=0.01CV or 3 A, whichever is greater.
(at 20℃ after 2 minutes)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Dissipation Factor
Rated voltage (Vdc)
tan (Max.)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.09 0.08
(tan )
δ
δ
(at 20℃, 120Hz)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Capacitance changeΔC ( 55℃ /+20℃) 0.7min.
Max. impedance ratio ( 55℃ /+20℃) 3max.(6.3Vdc : 4max.)
Low Temperature
Characteristics
-
(at 120Hz)
-
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time
φ5 to 6.3 : 2,000hoursꢀφ8 & 10 : 3,000hoursꢀφ12.5 toφ18 : 5,000hours
≦±20% of the initial value
Capacitance change
D.F. (tan )
≦200% of the initial specified value
δ
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tan )
≦200% of the initial specified value
≦The initial specified value
δ
Leakage current
DIMENSIONS [mm]
Terminal Code : E
◆
●
Sleeve (PET : Brown)
φD
5
6.3
8
10 12.5 16
18
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD+0.5max.
φ
d
F
φD'
L'
L'
15min.
4min.
(φ5 toφ10)
(φ12.5 toφ18)
L+1.5max.
Vent
(Exceptφ5 &φ6.3)
Gas escape end seal
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E L X V A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
µ
µ
Capacitance code (ex. 120 F:121, 1,500 F:152)
·
Lead forming taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 25V:250, 100V:101)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001N
163