MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105℃
LXY P5-46
Lower Z
LXVSeries
Low impedance
Endurance with ripple current : 2,000 to 5,000 hours at 105
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・
・
・
・
・
LXV
℃
Lower Z
Longer life
KMG P5-18
RoHS2 Compliant
AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-55 to +105
℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 100Vdc
20% (M)
(at 20 , 120Hz)
±
℃
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20 after 2 minutes)
℃
Dissipation Factor
Rated voltage (Vdc
tan (Max.)
δ
)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.09 0.08
(tan
)
δ
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20 , 120Hz)
℃
Low Temperature
Characteristics
Capacitance change C (-55 /+20 )
℃
0.7min.
3max.(6.3Vdc: 4max.)
Δ
℃
Max. impedance ratio (-55 /+20
)
℃
(at 120Hz)
℃
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
℃
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105
.
℃
Time
5 to 6.3 : 2,000hoursꢀ 8 &10: 3,000hoursꢀ 12.5to 18: 5,000hours
φ
φ
φ
φ
Capacitance change
20% of the initial value
≦±
D.F. (tan
Leakage current
)
200% of the initial specified value
The initial specified value
δ
≦
≦
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without
℃
℃
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 20% of the initial value
D.F. (tan
≦±
)
200% of the initial specified value
The initial specified value
δ
≦
≦
Leakage current
DIMENSIONS [mm]
Terminal Code : E
◆
●
Sleeve (PET : Brown)
φD
5
6.3
8
10 12.5 16
18
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD+0.5max.
φ
d
F
φD'
L'
L'
15min.
4min.
(φ5 toφ10)
(φ12.5 toφ18)
L+1.5max.
Vent
(Exceptφ5 &φ6.3)
Gas escape end seal
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E L X V A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
µ
µ
Capacitance code (ex. 120 F:121, 1,500 F:152)
·
Lead forming taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 25V:250, 100V:101)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001R
5-48