EL5106, EL5306
®
Data Sheet
September 1, 2004
FN7357.3
350MHz Fixed Gain Amplifiers with Enable
Features
• Pb-free Available as an Option
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
• Gain selectable (+1, -1, +2)
• 350MHz -3dB BW (A = 2)
V
• 1.5mA supply current per amplifier
• Fast enable/disable
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
• 450MHz, 3.5mA product available (EL5108 & EL5308)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
The EL5106 is offered in the 6-pin SOT-23 and the industry-
standard 8-pin SO packages and the EL5306 is available in
the 16-pin SO and 16-pin QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
• Cable drivers
• RGB amplifiers
Ordering Information
PART
TAPE &
REEL
NUMBER
PACKAGE
6-Pin SOT-23
6-Pin SOT-23
8-Pin SO
PKG. DWG. #
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
MDP0040
MDP0040
EL5106IW-T7
EL5106IW-T7A
EL5106IS
7” (3K pcs)
7” (250 pcs)
-
7”
13”
-
EL5106IS-T7
EL5106IS-T13
EL5306IS
8-Pin SO
8-Pin SO
16-Pin SO (0.150”)
16-Pin SO (0.150”)
EL5306IS-T7
7”
13”
-
EL5306IS-T13 16-Pin SO (0.150”)
EL5306IU
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
EL5306IU-T7
EL5306IU-T13
7”
13”
-
EL5306IUZ
(See Note)
16-Pin QSOP
(Pb-free)
EL5306IUZ-T7
(See Note)
16-Pin QSOP
(Pb-free)
7”
MDP0040
MDP0040
EL5306IUZ-
T13 (See Note)
16-Pin QSOP
(Pb-free)
13”
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.