EL5108, EL5308
®
Data Sheet
August 31, 2004
FN7358.4
450MHz Fixed Gain Amplifiers with Enable
Features
• Pb-free Available as an Option
The EL5108 and EL5308 are fixed gain amplifiers with a
bandwidth of 450MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain-setting resistors and can be configured
in a gain of +1, -1 or +2. The same bandwidth is seen in both
gain-of-1 and gain-of-2 applications.
• Gain selectable (+1, -1, +2)
• 450MHz -3dB BW (A = -1, +1, +2)
V
• 3.5mA supply current per amplifier
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
The EL5108 and EL5308 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
• 350MHz, 1.5mA product available (EL5106 & EL5306)
Applications
The EL5108 is offered in the 6-pin SOT-23 and the industry-
standard 8-pin SO packages and the EL5308 is available in
the 16-pin SO and 16-pin QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
Ordering Information
• Cable drivers
PART
TAPE &
REEL
• RGB amplifiers
NUMBER
PACKAGE
6-Pin SOT-23
6-Pin SOT-23
8-Pin SO
PKG. DWG. #
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
MDP0040
MDP0040
EL5108IW-T7
EL5108IW-T7A
EL5108IS
7” (3K pcs)
7” (250 pcs)
-
7”
13”
-
EL5108IS-T7
EL5108IS-T13
EL5308IS
8-Pin SO
8-Pin SO
16-Pin SO (0.150”)
16-Pin SO (0.150”)
EL5308IS-T7
7”
13”
-
EL5308IS-T13 16-Pin SO (0.150”)
EL5308IU
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
EL5308IU-T7
EL5308IU-T13
7”
13”
-
EL5308IUZ
(See Note)
16-Pin QSOP
(Pb-free)
EL5308IUZ-T7
(See Note)
16-Pin QSOP
(Pb-free)
7”
MDP0040
MDP0040
EL5308IUZ-
T13 (See Note)
16-Pin QSOP
(Pb-free)
13”
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.