EL1507
®
Data Sheet
February 9, 2005
FN7013.1
Medium Power Differential Line Driver
Features
The EL1507 is a very low power dual operational amplifier
designed for central office and customer premise line driving
for DMT ADSL solutions. This device features a high drive
capability of 400mA while consuming only 7.5mA of supply
current per amplifier from ±12V supplies. This driver
achieves a typical distortion of less than -75dBc, at 1MHz
into a 50Ω load. The EL1507 is available in the thermally-
enhanced 16-pin SO package, as well as a 16-pin QFN
package. Both are specified for operation over the full
-40°C to +85°C temperature range.
• Drives 360mA at 16V
on ±12V supplies
differential output drive into 100Ω
P-P
• 40V
P-P
• -75dBc typical driver output distortion driving 50Ω at 1MHz
and ½-I bias current
S
• Low quiescent current of 3.5mA per amplifier in ½-I
mode
S
• Power down disable mode
• Pb-Free available (RoHS compliant)
The EL1507 has two control pins, C and C . With the
0
1
Applications
selection of C and C , the device can be set into full-I
0
1
S
• ADSL G.DMT and G.lite CO line driving
• G.SHDSL, HDSL2 line driver
• ADSL CPE line driving
power, ¾-I power, ½-I power, and power down disable
modes. The EL1507 maintains excellent distortion and load
driving capabilities even in the lowest power settings.
S
S
• Video distribution amplifier
• Video twisted-pair line driver
Ordering Information
TAPE &
PART NUMBER
EL1507CS
PACKAGE
16-Pin SO
16-Pin SO
16-Pin SO
REEL
PKG. DWG. #
MDP0027
MDP0027
MDP0027
MDP0027
-
7”
13”
-
EL1507CS-T7
EL1507CS-T13
EL1507CSZ
( See Note)
16-Pin SO
(Pb-free)
Get FULL DATASHEET
EL1507CSZ-T7
(See Note)
16-Pin SO
(Pb-free)
7”
MDP0027
MDP0027
EL1507CSZ-T13
(See Note)
16-Pin SO
(Pb-free)
13”
EL1507CL
16-Pin QFN
16-Pin QFN
16-Pin QFN
-
MDP0046
MDP0046
MDP0046
EL1507CL-T7
EL1507CL-T13
7”
13”
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.