MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105℃
KZM
K
Z
M
Series
●Long-Life version of KZH series
Longer life
KZH
●Endurance with ripple current : 6,000 to 10,000 hours at 105℃
●Newly innovative electrolyte is employed to minimize ESR
●Rated voltage range : 6.3 to 50Vdc, Nominal capacitance range : 27 to 10,000 F
●Non solvent resistant type
µ
Lower Z
KZE
●RoHS Compliant
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105℃
Rated Voltage Range 6.3 to 50Vdc
Capacitance Tolerance ±20% (M)
(at 20℃, 120Hz)
Leakage Current
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
6.3V 10V 16V 25V 35V 50V
0.22 0.19 0.16 0.14 0.12 0.10
Dissipation Factor
(tanδ)
Rated voltage (Vdc)
tanδ(Max.)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
2 max.
3 max.
Low Temperature
Characteristics
Z(
-
25℃)/Z(+20℃)
Z(
-
40℃)/Z(+20℃)
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time
φ5 &φ6.3 : 6,000hours φ8 : 8,000hours φ10 to φ18 : 10,000hours
Capacitance change
D.F. (tanδ)
Leakage current
≦±25% of the initial value (6.3, 10Vdc : ≦± 30%)
≦200% of the initial specified value
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanδ)
Leakage current
≦±25% of the initial value (6.3, 10Vdc : ≦±30%)
≦200% of the initial specified value
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : E
Sleeve(PET : Brown)
φD
5
6.3
8
10 12.5 16
18
φ
F
d
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD'
φD+0.5max.
L'
L+1.5max.
L'
15min.
4min.
(φ5 toφ10)
(φ12.5 toφ18)
Gas escape end seal
Vent
(Exceptφ5 &φ6.3)
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E K Z M A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
µ µ
Capacitance code (ex. 100 F:101, 1,000 F:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 10V:100)
Series code
Category
Please refer to "Product code guide (radial lead type)"
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency Multipliers
Frequency (Hz)
120
0.40
0.50
0.60
0.75
0.85
1k
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
µ
Capacitance ( F)
27 to 180
220 to 560
680 to 1,800
2,200 to 3,900
4,700 to 10,000
0.75
0.85
0.87
0.90
0.95
Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/3)
CAT. No. E1001M