MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105℃
KZN P5-21
Higher ripple
KZMSeries
Rated voltage range : 6.3 to 50Vdc, Nominal capacitance range : 27 to 10,000µF
Non solvent resistant type
RoHS2 Compliant
Long-Life version of KZH series
Endurance with ripple current : 6,000 to 10,000 hours at 105
Newly innovative electrolyte is employed to minimize ESR
・
・
・
・
・
・
KZM
℃
Longer life
KZH P5-27
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-40 to +105
℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 50Vdc
20% (M)
(at 20 , 120Hz)
±
℃
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20 after 2 minutes)
℃
Dissipation Factor
Rated voltage (Vdc
tan (Max.)
)
6.3V 10V 16V 25V 35V 50V
0.22 0.19 0.16 0.14 0.12 0.10
(tan
)
δ
δ
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20 , 120Hz)
℃
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z (-25 ) / Z (+20
)
)
2max.
3max.
℃
℃
℃
Z (-40 ) / Z (+20
℃
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
℃
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105
.
℃
Time
5 & 6.3 : 6,000hours
8 : 8,000hours
10 to 18 : 10,000hours
φ φ
φ
φ
φ
Capacitance change
25% of the initial value (6.3, 10Vdc
:
30%)
≦±
≦±
D.F. (tan
Leakage current
)
200% of the initial specified value
The initial specified value
δ
≦
≦
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without
℃
℃
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 25% of the initial value (6.3, 10Vdc 30%)
:
≦±
≦±
D.F. (tan
Leakage current
)
200% of the initial specified value
The initial specified value
δ
≦
≦
DIMENSIONS [mm]
●Terminal Code : E
◆
Sleeve(PET : Brown)
φD
5
6.3
8
10 12.5 16
18
φ
F
d
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD'
φD+0.5max.
L'
L+1.5max.
L'
15min.
4min.
(φ5 toφ10)
(φ12.5 toφ18)
Gas escape end seal
Vent
(Exceptφ5 &φ6.3)
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E K Z M A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100 F:101, 1,000 F:102)
µ
µ
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 10V:100)
Series code
Category
Please refer to "Product code guide (radial lead type)"
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
◆
・
Frequency(Hz)
120
1k
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
Capacitance(µF)
27 to 180
0.40
0.50
0.60
0.75
0.85
0.75
0.85
0.87
0.90
0.95
220 to 560
680 to 1,800
2,200 to 3,900
4,700 to 10,000
Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001R
5-24