MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
160 to 450Vdc long life, 105℃
KXJ P5-53
Downsized
KXGSeries
For electronic ballast circuits and other long life applications
Endurance with ripple current : 8,000 to 10,000 hours at 105
Non solvent resistant type
・
・
・
・
℃
KXG
RoHS2 Compliant
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-40 to +105 (160 to 400Vdc
)
-25 to+105 (450Vdc)
℃
℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
160 to 450Vdc
20% (M)
(at 20 , 120Hz)
℃
±
After 1 minute
I=0.1CV+40
I=0.04CV+100
After 5 minutes
I=0.03CV+15
I=0.02CV+25
CV 1,000
≦
CV>1,000
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20
)
℃
Dissipation Factor
Rated voltage (Vdc
tan (Max.)
δ
)
160 to 250V
350 to 450V
(tan
)
δ
0.20
0.24
(at 20 , 120Hz)
℃
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc
)
160 to 250V
350 & 400V
450V
6
Z(-25 )/Z(+20
)
℃
)
3
6
5
6
℃
Z(-40 )/Z(+20
(at 120Hz)
℃
℃
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
℃
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours for 10) at 105
.
℃
φ
Capacitance change
D.F. (tan
Leakage current
20% of the initial value
200% of the initial specified value
The initial specified value
≦±
≦
≦
)
δ
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without
℃
℃
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 20% of the initial value
D.F. (tan
≦±
)
200% of the initial specified value
500% of the initial specified value
δ
≦
≦
Leakage current
DIMENSIONS [mm]
◆
●
Terminal Code : E
Sleeve (PET : Brown)
10 12.5 16
18
φ
D
0.6 0.6 0.8
0.8
φ
d
F
φD'
L'
5.0 5.0 7.5 7.5
+
φD 0.5max.
L'
15min.
4min.
Vent
+
L 1.5max.
(φ10)
(φ12.5 toφ18)
Gas escape end seal
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E K X G A A A E A A A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101)
·
Lead forming taping code
Terminal code
Voltage code (ex. 160V:161,450V:451)
Series code
Category
Please refer to "Product code guide (radial lead type)"
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
◆
・
Frequency(Hz)
120
1.00
1.00
1k
1.75
1.67
10k
2.25
2.05
100k
2.50
2.25
Capacitance(µF)
6.8 to 82
100 to 330
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001R
5-57