160 to 450Vdc long life, 105℃
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
KXJ
Downsized
●
●
●
●
For electronic ballast circuits and other long life applications
Endurance with ripple current : 8,000 to 10,000 hours at 105℃
Non solvent resistant type
KXG
RoHS Compliant
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
40 to +105℃ (160 to 400Vdc)
25 to+105℃ (450Vdc)
Rated Voltage Range 160 to 450Vdc
Capacitance Tolerance ±20% (M)
Leakage Current
(at 20℃, 120Hz)
After 1 minute
After 5 minutes
CV≦1,000
I=0.1CV+40
I=0.03CV+15
I=0.02CV+25
CV
>
1,000
I=0.04CV+100
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃)
Dissipation Factor
Rated voltage (Vdc)
tanδ(Max.)
160 to 250V 350 to 450V
0.20 0.24
160 to 250V 350 & 400V 450V
δ
(tan )
(at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
Z(
-
25℃)/Z(+20℃)
40℃)/Z(+20℃)
3
6
5
6
6
Z(
-
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours forφ10) at 105℃.
Capacitance change
D.F. (tanδ)
≦ 20% of the initial value
≦200% of the initial specified value
≦The initial specified value
±
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanδ)
≦±20% of the initial value
≦200% of the initial specified value
≦500% of the initial specified value
Leakage current
◆DIMENSIONS [mm]
●
Terminal Code : E
Sleeve (PET : Brown)
10 12.5 16
18
φ
D
0.6 0.6 0.8
0.8
φ
d
F
φD'
L'
5.0 5.0 7.5 7.5
+
φD 0.5max.
L'
15min.
4min.
Vent
+
L 1.5max.
(φ10)
(φ12.5 toφ18)
Gas escape end seal
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E K X G A A A E A A A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101)
·
Lead forming taping code
Terminal code
Voltage code (ex. 160V:161,450V:451)
Series code
Category
Please refer to "Product code guide (radial lead type)"
◆RATED RIPPLE CURRENT MULTIPLIERS
●
Frequency Multipliers
Frequency (Hz)
120
1.00
1.00
1k
1.75
1.67
10k
2.25
2.05
100k
2.50
2.25
Capacitance (µF)
6.8 to 82
100 to 330
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise.
℃
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/2)
CAT. No. E1001L