MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard, Downsized, 105
C
KMQ
downsized
@Downsized from KME series
KMG
@Solvent-proof type except 350 to 450Vdc
(see PRECAUTIONS AND GUIDELINES)
@Pb-free design
downsized
KME
SPECIFICATIONS
?
Items
Characteristics
Category
Temperature Range
-55 to +105C(6.3 to 100Vdc)
-40 to +105C(160 to 400Vdc) -25 to +105C(450Vdc)
Rated Voltage Range 6.3 to 450Vdc
Capacitance Tolerance P20% (M)
(at 20C, 120Hz)
After 5minutes
Leakage Current
6.3 to 100Vdc
I=0.03CV or 4MA, whichever is greater.
160 to 450Vdc
Time
After 1minute
CV
CV[1000 I=0.1CV+40 max.
CV 1000 I=0.04CV+100 max.
I=0.03CV+15 max.
I=0.02CV+25 max.
>
(at 20C after 1 minute)
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C)
Dissipation Factor
(tane)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
tanE (Max.)
0.34 0.24 0.20 0.16 0.14 0.12 0.10 0.08
0.20
0.24
0.24
When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase.
(at 20C, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
Z(-25C)/Z(+20C)
5
4
3
8
2
5
2
4
2
3
2
3
2
3
3
4
6
6
6
Z(-40C)/Z(+20C)
(at 120Hz)
12
10
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 1000 hours (2000 hours to meet the following two conditions 1) : 160Vdc and larger, 2) : F12.5 and larger) at 105C.
Capacitance change
D.F. (tanE)
[P20% of the initial value
[200% of the initial specified value
[The initial specified value
Leakage current
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Rated voltage
6.3 to 100Vdc
160 to 450Vdc
Capacitance change
D.F. (tanE)
[P20% of the initial value
[P20% of the initial value
[200% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[500% of the initial specified value
DIMENSIONS [mm]
?
@Terminal Code : E
Sleeve (PET)
fD
5
6.3
8
10 12.5 16
18
fd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F
fD'
L'
2.0 2.5 3.5 5.0 5.0 7.5 7.5
FD+0.5max.
L'
15min.
4min.
L+1.5max
(F5 to F10)
(F12.5 to F18)
Vent
Gas escape end seal
(except F5)
PART NUMBERING SYSTEM
?
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E KMG A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 0.1MF:R10,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,35V:350,100V:101)
Series code
Category
Please refer to "A guide to global code (radial lead type)"
(1/3)
CAT. No. E1001E