EBD12UB8ALF-7A

更新时间： 2024-02-15 01:29:24

品牌	Logo	应用领域
尔必达 - ELPIDA		动态存储器双倍数据速率
页数	文件大小	规格书
16页	160K
描述
128MB Unbuffered DDR SDRAM DIMM

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

EBD12UB8ALF-7A 数据手册

EBD12UB8ALF

Pin Functions (1)

CLK, /CLK (input pin): The CLK and the /CLK are the master clock inputs. All inputs except DMs, DQSs and DQs

are referred to the cross point of the CLK rising edge and the VREF level. When a read operation, DQSs and DQs

are referred to the cross point of the CLK and the /CLK. When a write operation, DMs and DQs are referred to the

cross point of the DQS and the VREF level. DQSs for write operation are referred to the cross point of the CLK and

the /CLK.

/CS (input pin): When /CS is Low, commands and data can be input. When /CS is High, all inputs are ignored.

However, internal operations (bank active, burst operations, etc.) are held.

/RAS, /CAS, and /WE (input pins): These pins define operating commands (read, write, etc.) depending on the

combinations of their voltage levels. See "Command operation".

A0 to A11 (input pins): Row address (AX0 to AX11) is determined by the A0 to the A11 level at the cross point of

the CLK rising edge and the VREF level in a bank active command cycle. Column address (AY0 to AY9) is loaded

via the A0 to the A9 at the cross point of the CLK rising edge and the VREF level in a read or a write command

cycle. This column address becomes the starting address of a burst operation.

A10 (AP) (input pin): A10 defines the precharge mode when a precharge command, a read command or a write

command is issued. If A10 = High when a precharge command is issued, all banks are precharged. If A10 = Low

when a precharge command is issued, only the bank that is selected by BA1, BA0 is precharged. If A10 = High

when read or write command, auto-precharge function is enabled. While A10 = Low, auto-precharge function is

disabled.

BA0, BA1 (input pin): BA0/BA1 are bank select signals. The memory array is divided into bank 0, bank 1, bank 2

and bank 3. If BA1 = Low and BA0 = Low, bank 0 is selected. If BA1 = High and BA0 = Low, bank 1 is selected. If

BA1 = Low and BA0 = High, bank 2 is selected. If BA1 = High and BA0 = High, bank 3 is selected.

CKE (input pin): CKE controls power down and self-refresh. The power down and the self-refresh commands are

entered when the CKE is driven Low and exited when it resumes to High.

The CKE level must be kept for 1 CLK cycle (= LCKEPW) at least, that is, if CKE changes at the cross point of the

CLK rising edge and the VREF level with proper setup time tIS, at the next CLK rising edge CKE level must be kept

with proper hold time tIH.

Pin Functions (2)

DQ (input and output pins): Data are input to and output from these pins.

DQS (input and output pin): DQS provide the read data strobes (as output) and the write data strobes (as input).

DM (input pins): DM is the reference signal of the data input mask function. DMs are sampled at the cross point of

DQS and VREF

VDD and VDDQ (power supply pins): 2.5V is applied. (VDD is for the internal circuit and VDDQ is for the output

buffer.)

VDDSPD (power supply pin): 2.5V is applied (For serial EEPROM).

VSS (power supply pin): Ground is connected.

Detailed Operation Part, AC Characteristics and Timing Waveforms

Refer to the EDD1204ALTA, EDD1208ALTA, EDD1216ALTA Series datasheet (E0136E).

Preliminary Data Sheet E0216E10 (Ver. 1.0)

1...6 7 8910 11 12...16

中文翻译

下载PDF

与EBD12UB8ALF-7A相关器件

型号	品牌	获取价格	描述	数据表
EB-D13.00M	CTS	获取价格	Clipped Sine Output Oscillator, 13MHz Nom, MINIATURE, SMD, 4 PIN
EBD13UB6ALS	ELPIDA	获取价格	128MB DDR SDRAM S.O. DIMM
EBD13UB6ALS-1A	ELPIDA	获取价格	128MB DDR SDRAM S.O. DIMM
EBD13UB6ALS-75	ELPIDA	获取价格	128MB DDR SDRAM S.O. DIMM
EBD13UB6ALS-7A	ELPIDA	获取价格	128MB DDR SDRAM S.O. DIMM
EB-D14.40M	CTS	获取价格	TCXO, CLIPPED SINE OUTPUT, 14.4MHz, MINIATURE, SMD, 4 PIN
EB-D-14.40M	CTS	获取价格	Oscillator, 10MHz Min, 20MHz Max, 14.4MHz Nom,
EB-D14.85M	CTS	获取价格	TCXO, CLIPPED SINE OUTPUT, 14.85MHz, MINIATURE, SMD, 4 PIN
EBD15A	ADAM-TECH	获取价格	EURO BLOCKS TS & EB SERIES
EBD15B	ADAM-TECH	获取价格	EURO BLOCKS TS & EB SERIES

与EBD12UB8ALF-7A相关文章

L7805CV手册解读：引脚说明、电气参数、替代型号推荐、好坏检测
2024-06-06

1
MMBT5551资料手册解读：电气参数、替换型号推荐
2024-06-06

1
APW7073资料手册解读：产品特性、引脚说明、替换型号推荐
2024-06-06

0
晶闸管阳极与阴极之间加电压时控制极的电流流动分析
2024-06-05

12

产品中心

服务支持

精选活动

关于我们

帮助中心

EBD12UB8ALF-7A

EBD12UB8ALF-7A 数据手册

与EBD12UB8ALF-7A相关器件

与EBD12UB8ALF-7A相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

EBD12UB8ALF-7A

EBD12UB8ALF-7A 数据手册

与EBD12UB8ALF-7A相关器件

与EBD12UB8ALF-7A相关文章

您还可以找

您在本页遇到什么问题？