DMS-EB-DC/DC
DC/DC Converter and Isolation Board for
DMS-30PC/LCD Meters
Description: The DMS-EB-DC/DC Application Board provides isolated +5V power for
DATEL's DMS-30PC/LCD Series, 3½ Digit, LED/LCD Display, Digital Panel Voltmeters. This
add-on board is ideal for applications requiring isolation (up to 750V) between the input
signal and the meter's +5V supply.
FEATURES
N
Provide isolated +5V power for DMS-30 Series meters
N
750V minimum isolation
Features: The DMS-EB-DC/DC is an excellent choice for dc ammeter applications.
These ammeters typically have the current shunt located on the positive side of the power
supply — a condition which usually exceeds the meter's common mode voltage limit.
Input-to-output isolation is required if the power source being measured also powers the
DMS-30. DATEL's new Panel Meter Catalog has a detailed application note on dc amme-
ters.
Applications: The DMS-EB-DC/DC incorporates all standard features of the DMS-EB
board; the only exception being the smaller allowable range of power supply voltage when
using the LM7805 3-terminal regulator. Use the DMS-EB-DC/DC with any DMS-30PC meter
or DMS-30LCD meter (5V-powered models only).
N
Ideal for high-side dc ammeters shunts
N
Provisions for +12V operation
N
Includes all the features of the standard DMS-EB board
N
Use with all DMS-30PC and DMS-30LCD
(5V models only)
N
–25 to +60°C operating temperature range
+7.5-18V Operation (Optional): Open SG4 and install U2 (LM7805CT) with its metal
tab adjacent to U1. Applications requiring a lower dropout voltage should consider the
Functional Specifications
TA = 25°C, VCC = +5V
LM2931T-5. Exceeding the
C4
12
1
Input Voltage
+5V ( 5ꢀ)
R1
SG14
R2
C1
SG6 SG5
allowable regulator input voltage
ranges (see Functional Specifica-
tions) will cause device over-
heating! As is the case when
specifying any electronic power
component, be sure to consult all
applicable manufacturer's data
sheets.
SG10
C3
U1
SG11 SG9 SG8
Input Current:
Typical
Maximum
SG7
+150mA
+250mA
R3
R6
C4
U2
Regulator Input Voltage Range
(LM7805CT):
DMS-30PC-X-XS
SG2
SG4
J1
SG12
R5
R4
SG3
1
2
3
4
5
6
SG1
+7.5 to +9.5Vdc
+7.5 to +18Vdc
+7.5 to +18Vdc
DMS-30PC-X-RL
DMS-30LCD-X-5(B)
Output Voltage
Isolation
+5V ( 5ꢀ)
Ordering Information
750V, minimum
0 to +60°C
DMS-EB-DC/DC
DMS-BZL1
DMS-BZL2
RN-DMS
DC/DC converter board (with mating connector)
Bezel assembly
Operating Temperature
Storage Temperature
Dimensions:
Bezel assembly with sealing gasket
Resistor accessory kit
–20 to +75°C
2.02" (51.31mm)L
0.83" (21.08mm)W
Humidity (Non-condensing)
0 to 95ꢀ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MPM_DMS-EB-DCDC.B01 Page 1 of 2