Data Sheet
GE
EBDW025A0B Barracuda™ Series; DC-DC Converter Power Modules
36-75Vdc Input; 12.0Vdc, 25.0A, 300W Output
Features
RoHS Compliant
.
.
.
.
Compliant to RoHS EU Directive 2002/95/EC (-Z versions)
Compliant to REACH Directive (EC) No 1907/2006
Compatible with reflow pin/paste soldering process
High and flat efficiency profile >95.2% at 12Vdc,40% to 80%
rated output
.
.
.
.
.
.
.
.
Wide input voltage range: 36-75Vdc
Delivers up to 25Adc output current
Remote sense and output voltage trim
Fully very tightly regulated output voltage
Output voltage adjust (via PMBus): 5.0Vdc to 13.2Vdc
Low output ripple and noise
No reverse current during prebias start-up or shut-down
Industry standard, DOSA compliant, Eighth brick:
58.4 mm x 22.8 mm x 11.3 mm
(2.30 in x 0.90 in x 0.44 in)
Applications
.
.
.
.
.
Distributed power architectures
.
.
.
.
.
.
.
Constant switching frequency
Intermediate bus voltage applications
Servers and storage applications
Positive remote On/Off logic
Output over current/voltage protection
Digital interface with PMBus™ Rev.1.2 compliance^
Over temperature protection
Networking equipment including Power over Ethernet (PoE)
Fan assemblies other systems requiring a tightly regulated
output voltage
Wide operating temperature range (-40°C to 85°C)
CAN/CSA† C22.2 No. 60950-1-07, 2nd Edition + A1:2011
(MOD), ANSI/UL*60950-1-2011, IEC 60950-1 (2nd edition);
am1, and VDE‡ (EN60950-1, 2nd Ed.) Licensed
CE mark 2006/96/EC directives§
Options
.
Negative Remote On/Off logic (1=option code, factory
.
.
preferred)
Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
2250 Vdc Isolation tested in compliance with IEEE 802.3¤ PoE
standards
.
Auto-restart after fault shutdown (4=option code, factory
preferred)
.
.
Base plate option (-H=option code)
.
.
Passive Droop Load Sharing (-P=option code)
ISO** 9001 and ISO14001 certified manufacturing facilities
Description
The EBDW025A0B Barracuda™ series of dc-dc converters are a new generation of DC/DC power modules designed to support 9.6
-12Vdc intermediate bus applications where multiple low voltages are subsequently generated using point of load (POL) converters,
as well as other application requiring a tightly regulated output voltage. The EBDW025A0B series operate from an input voltage
range of 36 to 75Vdc, and provide up to 25A output current at output voltages from 5.0Vdc to 12.0Vdc, and 300W output power from
output voltages of 12.1Vdc to 13.2Vdc in a DOSA standard eighth brick. The converter incorporates digital control, synchronous
rectification technology, a fully regulated control topology, and innovative packaging techniques to achieve efficiency exceeding
95.4% peak at 12Vdc output. This leads to lower power dissipations such that for many applications a heat sink is not required.
Standard features include output voltage trim, remote sense, on/off control, output overcurrent and over voltage protection, over
temperature protection, input under and over voltage lockout, power good signal and PMBus interface.
The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. Built-in filtering for
both input and output minimizes the need for external filtering.
^
*
PMBus name and logo are registered trademarks of SMIF, Inc.
UL is a registered trademark of Underwriters Laboratories, Inc.
†
‡
§
¤
CSA is a registered trademark of Canadian Standards Association.
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.
April 15, 2013
©2012 General Electric Company. All rights reserved.
Page 1