DSTINIm410
Networked Micro Evaluation Board
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
ꢀ
Hosts the TINI® Runtime Environment in
Validated Hardware Design (in Conjunction
with the DSTINIs400)
The DSTINIm410 is a fully assembled and tested
circuit board that evaluates the DS80C410 network
microcontroller. In addition to the DS80C410, the
DSTINIm410 includes a real-time clock, 1MB flash,
1MB static RAM, and support for an external
Ethernet PHY for connecting to a wide variety of
networks. The circuit board is designed as a module
to be plugged into a 144-pin SODIMM connector. For
evaluation, the DSTINIm410 can be inserted into the
DSTINIs400 socket board. The combination of the
two boards allows full evaluation of the features of
the DS80C410 using an Ethernet network.
ꢀ
Industry Standard MII Interface to Connects to
Network Interfaces Including 10/100 Base-T,
Optical, and HomePNA
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Three Hardware Serial Ports
Integrated 1-Wire® Network Master
CAN 2.0B Port
Real-Time Clock for Time Stamping
1MB Flash ROM for Application Storage
1MB NV SRAM for Data Storage
3.3V Single-Supply Operation
Fully Assembled and Tested Design
Detailed information about the initial setup process
and use of the TINI platform is contained in
Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
ORDERING INFORMATION
PART
TEMP RANGE
DIMENSIONS
Approx. 67mm x
48mm, 144 SODIMM
Approx. 67mm x
DSTINIm410
Room temp
DSTINIm410#
Room temp
48mm, 144 SODIMM
Note: To evaluate the DS80C410, order the DSTINIm410 and
DSTINIs400.
# Denotes a RoHS-compliant device that may include lead that is
exempt under the RoHS requirements.
TINI and 1-Wire are registered trademarks of Dallas Semiconductor.
COMPONENT LIST
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
C1–C5,
C8–C14, C17,
C18
DS1
1
2
SML-LX23SRC Lumex LED
0.1μF, ±20%, 10V ceramic
14
BSS84 P-Channel FET
(SOT23)
capacitors (0805)
Q1, Q3
27pF, ±20%, 50V C0G ceramic
capacitors (0805)
2N7002 N-Channel FET
(SOT23)
C6, C7
C15
2
1
1
2
Q2
1
1.0μF, ±20%, 10V ceramic
capacitor (1206)
R1, R4, R7, R8
4
1
1
1
10kΩ, ±5% resistors (0805)
1.5kΩ, ±5% resistor (0805)
1kΩ, ±5% resistor (0805)
2.2kΩ, ±5% resistor (0805)
R2
R3
R5
4.7μF, ±20%, 10V ceramic
capacitor (1206)
C16
47μF, ±20%, tantalum
capacitors (C)
C19, C20
BT1
DN1
1
1
CR1632 3V lithium cell
BAT54S diode (SOT23)
1 of 5
REV: 071706