DSTINIs400/DSTINIs-00x
Sockets Evaluation Board
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
The TINI® sockets boards are motherboards
designed to host the corresponding TINI evaluation
module. The combination of the two boards allows
full evaluation of the features of the target
microprocessor. To evaluate the DS80C400, you
only need to order the DS80C400-KIT. To evaluate
the DS80C410 or DS80C411, you must order both
the DSTINIm410# and the DSTINIs400# and use
them together. The DSTINIm410# is used to evaluate
both the DS80C410 and DS80C411.
ꢀ
Hosts the TINI Runtime Environment in
Validated Hardware Design (in Conjunction
with the DSTINIm400)
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
10/100 Base-T Ethernet Port
Two Serial Ports
Dual 1-Wire Network Ports
CAN 2.0B Port
5.0V Single-Supply Operation (DSTINIm400)
Fully Assembled and Tested Design
Although various boards support different evaluation
modules, the most popular is the DSTINIs400#. It
includes a 144-pin SODIMM connector and provides
1-Wire®, CAN 2.0B, serial, and a 10/100 Ethernet
PHY for connecting the DSTINIm400# or
DSTINIm410# to the physical world.
The DSTINIm400# and DSTINIm410# are designed
as modules to be plugged into the 144-pin SODIMM
connector on the DSTINIs400#. All are fully
assembled and, when used together in the correct
combinations, they form a complete evaluation
system for the network microcontroller. The
DSTINIm400# and DSTINIm410# modules include
the
DS80C400
and
DS80C410
network
microcontrollers, a real-time clock, 1MB flash, 1MB
static RAM, and support for an external Ethernet
PHY for connecting to a wide variety of networks.
Detailed information about the initial setup process
and use of the TINI platform is contained in
Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
COMPONENT LIST
DESIGNATION
QTY
DESCRIPTION
C1
1
47pF capacitor (1206)
ORDERING INFORMATION
47μF tantalum
capacitors (3528-21)
INPUT
VOLTAGE*
USED WITH
MODULE
C2, C4, C5, C6
4
9
PART
DIMENSIONS
C3, C7, C9, C13,
C15, C26, C28,
C30, C38
DSTINIs400
Replaced with DSTINIs400#
100nF capacitors (1206)
10nF capacitors (1206)
5V DC
regulated
C12, C14, C17,
C19, C25, C27,
C29, C33, C37
DSTINIs400#
DSTINIs-005
DSTINIs-006
DSTINIm400
12cm x 10cm
9
5V DC
regulated
DSTINI1-1MG,
DSTINI1-512
16cm x 10cm
16cm x 10cm
C8
1
6
1
220nF, 16V capacitor (1206)
1.0μF capacitors (1206)
4.7μF capacitor (1206)
C10, C31, C32,
C34, C35, C36
9V to 18V
DC
DSTINI1-1MG,
DSTINI1-512
C11
Note: The DSTINIm400 is an evaluation board and is only tested to
prototype standards. It is not tested for use in a production product.
*The user must supply an external power supply.
TINI and 1-Wire are registered trademarks of Maxim Integrated
Products, Inc.
# Denotes a RoHS-compliant device that may include lead that is
exempt under the RoHS requirements.
1 of 12
REV: 061608