DS80C400 (DSTINIm400)
Networked Microcontroller Evaluation Kit
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
CꢀHosts the TINI® Runtime Environment in
Validated Hardware Design (in Conjunction with
the DSTINIs400)
The DSTINIm400 is a fully assembled and tested
circuit board that evaluates the DS80C400 network
microcontroller. In addition to the DS80C400, the
DSTINIm400 includes a real-time clock, 1MB flash,
1MB static RAM, and support for an external
Ethernet PHY for connecting to a wide variety of
networks. The circuit board is designed as a module
to be plugged into a 144-pin SODIMM connector. For
evaluation, the DSTINIm400 can be inserted into the
DSTINIs400 socket board. The combination of the
two boards allows full evaluation of the features of
the DS80C400 using an Ethernet network.
CꢀIndustry Standard MII Interface to Connects to
Network Interfaces Including 10/100 Base-T,
Optical, and HomePNA
CꢀThree Hardware Serial Ports
CꢀIntegrated 1-Wire® Network Master
CꢀCAN2.0B Port
CꢀReal-Time Clock for Time Stamping
Cꢀ1MB Flash ROM for Application Storage
Cꢀ1MB NV SRAM for Data Storage
Cꢀ3.3V Single-Supply Operation
CꢀFully Assembled and Tested Design
Detailed information about the initial setup process
and use of the TINI platform is contained in
Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
ORDERING INFORMATION
PART
TEMP RANGE
DIMENSIONS
Approx. 67mm x
DSTINIm400
0°C to +70°C
48mm, 144 SODIMM
Note: To evaluate the DS80C400, order both a DSTINIm400 and
a DSTINIs400.
COMPONENT LIST
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
C1–C5,
DN1
DS1
1
1
BAT54S diode (SOT23)
SML-LX23SRC Lumex LED
0.1ꢀF, ±20%, 10V ceramic
C8–C14, C17,
C18
14
capacitors (0805)
BSS84 P-Channel FET
27pF, ±20%, 50V C0G ceramic
capacitors (0805)
Q1, Q3
Q2
2
1
C6, C7
2
1
1
(SOT23)
2N7002 N-Channel FET
(SOT23)
10kꢁ, ±5% resistors (0805)
1.5kꢁ, ±5% resistor (0805)
1kꢁ, ±5% resistor (0805)
2.2kꢁ, ±5% resistor (0805)
1.0ꢀF, ±20%, 10V ceramic
C15
capacitor (1206)
R1, R4, R7, R8
4
1
1
1
4.7ꢀF, ±20%, 10V ceramic
C16
R2
R3
R5
capacitor (1206)
47ꢀF, ±20%, tantalum
C19, C20
BT1
2
1
capacitors (C)
CR1632 3V lithium cell
TINI and 1-Wire are registered trademarks of Dallas Semiconductor.
1 of 5
REV: 013004