DSM
Vishay Foil Resistors
High Precision Bulk Metal® Foil Surface Mount Voltage Divider,
TCR Tracking of < 0.5 ppm/°C, Tolerance Match of 0.01 %
and Stability of 0.005 % (50 ppm)
FEATURES
• Temperature Coefficient of Resistance (TCR):
Pb-free
Absolute: 2 ppm/°C typical
(- 55 °C to + 125 °C, + 25 °C Ref.)
Available
RoHS*
Tracking: 0.5 ppm/°C typical
COMPLIANT
• Tolerance: Absolute: 0.02 %; Match: 0.01 %
Any value at any ratio available within resistance range
• Power Rating at 70 °C: Entire Package: 0.1 W
Each Resistor: 0.05 W
INTRODUCTION
• Ratio Stability: 0.005 % (0.05 W at 70 °C, 2000 hours)
• Resistance Range: 100 Ω to 20 kΩ per resistor
• Large Variety of Resistance Ratios: 1:200
• Electrostatic Discharge (ESD) above 25 000 Volts
• Short Time Overload ≤ 0.005 %
Bulk Metal® Foil Technology out-performs all other resistor
technologies available today for applications that require High
Precision and High Stability.
This technology has been invented, patented and pioneered
by Vishay. Products based on this technology are the most
suitable for a wide range of appilcations.
• Non Inductive, Non Capacitive Design
• Rise Time: 1.0 ns without ringing
BMF technology allows to produce customer oriented
products designed to satisfy challenging and specific
technical requirements. Model DSM offers Low TCR (both
absolute and tracking), Excellent Load Life Stability, Tight
tolerance, Excellent Ratio Stability, and Low Current Noise,
all in one package.
• Current Noise: < - 40 dB
• Voltage Coefficient: < 0.1 ppm/V
• Non Inductive: < 0.08 µH
• Non Hot Spot Design
• Terminals: silver coated copper alloy
• Any value available within resistance range (e.g. 1K2345)
The DSM surface mount divider provides a matched pair of
Bulk Metal® Foil Resistors in a small epoxy molded package.
The electrical specification of this integrated construction
offers improved performance and better real estate utilization
over discrete resistors and matched pairs.
• Prototype samples available from 48 hours. For more
information, please contact foil@vishay.com
• For better performances, please see DSMZ datasheet
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
(Z-Foil)
APPLICATIONS
R2
• Instrumentation amplifiers
R1
• Bridge networks
Vin
-
FIGURE 1 - SCHEMATIC
Vout
+
• Differential amplifiers
• Ratio arms in bridge circuits
• Medical and test equipment
• Military
DSM
R1
R2
OPTION 1
OPTION 2
SAME OHMIC VALUE,
RESISTOR PAIR
• Airborne etc.
SAME ABSOLUTE TOLERANCE
R1/R2 - DIFFERENT VALUES
TABLE 1 - MODEL DSM SPECIFICATIONS
ABSOLUTE TCR
MODEL (- 55 °C TO + 125 °C, + 25 °C REF.)
TYPICAL + MAX. SPREAD
TOLERANCE
ABSOLUTE
RESISTANCE
TCR TRACKING
RATIO
MATCH
0.01 %
0.02 %
0.05 %
R1/R2 = 1
1.0 ppm/°C
2.0 ppm/°C
3.0 ppm/°C
0.02 %
0.05 %
0.1 %
DSM
2 ppm/°C 3 ppm/°C
1 < R1/R2 ≤ 10
10 < R1/R2 ≤ 200
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63088
Revision: 05-Jun-07
For any questions, contact: foil@vishay.com
www.vishay.com
1