Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
DRV2700
SLOS861B –MARCH 2015–REVISED APRIL 2015
DRV2700 Industrial Piezo Driver With Integrated Boost Converter
1 Features
3 Description
The DRV2700 device is a single-chip piezo driver
1
•
•
100-V Boost or 1-kV Flyback Configuration
with an integrated 105-V boost switch, integrated
power diode, and integrated fully-differential amplifier.
This versatile device is capable of driving both high-
voltage and low-voltage piezoelectric loads. The input
signal can be either differential or single-ended and
AC or DC coupled. The DRV2700 device supports
four GPIO-controlled gains: 28.8 dB, 34.8 dB, 38.4
dB, and 40.7 dB.
±100-V Piezo Driver in Boost + Amplifier
Configuration
–
–
–
–
4 GPIO-Adjustable Gains
Differential or Single-Ended Output
Low-Voltage Control
AC and DC Output Control
•
•
0 to 1-kV Piezo Driver in Flyback Configuration
The boost voltage is set using two external resistors.
The boost current-limit is programmable through the
R(REXT) resistor. The boost converter architecture
does not allow the demand on the supply current to
exceed the limit set by the R(REXT) resistor which
allows the user to optimize the DRV2700 circuit for a
given inductor based on the desired performance
requirements. Additionally, this boost converter is
–
–
Low-Voltage Control
AC and DC Output Control
Integrated Boost or Flyback Converter
–
–
Adjustable Current-Limit
Integrated Power FET and Diode
•
•
•
•
•
Fast Startup Time of 1.5 ms
based on
a hysteretic architecture to minimize
Wide Supply-Voltage Range of 3 to 5.5 V
4-mm × 4-mm × 0.9-mm VQFN package
1.8-V Compatible Digital Pins
Thermal Protection
switching losses and therefore increase efficiency.
A typical startup time of 1.5 ms makes the DRV2700
device an ideal piezo driver for coming out of sleep
quickly. Thermal overload protection prevents the
device from damage when overdriven.
2 Applications
Device Information(1)
•
•
•
•
•
Piezo Positioning Actuators
Piezo Sounder Driver
Piezo Inkjet Printer
DEVICE NAME
DRV2700
PACKAGE
BODY SIZE (NOM)
VQFN (20)
4.00 mm × 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Piezo Transducers
Piezoelectric Micropumps
4 Boost + Amplifier Configuration
L1
C(VDD)
SW
V
DD
BST
C(BOOST)
PUMP
Charge
R(FB1)
Pump
C(PUMP)
Boost
REXT
Controller
FB
R(REXT)
R(FB2)
PVDD
EN
C(IN)
IN+
OUT+
Piezo
Element
Gain
IN±
OUT±
C(IN)
GAIN0
Thermal
GAIN1
Shutdown
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.