DRV2665
www.ti.com
SLOS790 –MAY 2012
Piezo Haptic Driver with Integrated Boost Converter and Digital Front End
Check for Samples: DRV2665
1
FEATURES
DESCRIPTION
The DRV2665 is a piezo haptic driver with integrated
•
Integrated Digital Front End
105 boost switch, integrated power diode,
V
–
–
–
–
I2C Bus Control up to 400 kHz
Internal 100 Byte FIFO Interface
Immersion TS5000 Compliant
Optional Analog Inputs
integrated fully-differential amplifier, and integrated
digital front end. This versatile device is capable of
driving both high-voltage and low-voltage piezo haptic
actuators. The input signal can be driven as haptic
packets over the I2C port or via the analog inputs.
The DRV2665 digital interface is available via an I2C
compatible bus. A digital interface relieves the costly
processor burden of PWM generation or additional
analog channel requirements in the host system. Any
writes to the internal first-in, first-out buffer (FIFO) will
automatically wake up the device and begin playing
•
High Voltage Piezo-Haptic Driver
–
–
–
–
–
Drives up to 100 nF at 200 VPP and 300 Hz
Drives up to 150 nF at 150 VPP and 300 Hz
Drives up to 330 nF at 100 VPP and 300 Hz
Drives up to 680 nF at 50 VPP and 300 Hz
Differential Output
the waveform after the
2 ms internal startup
procedure. When the data flow stops or the FIFO
under-runs, the DRV2665 will automatically enter a
pop-less shutdown procedure.
•
Integrated 105 V Boost Converter
–
–
–
–
Adjustable Boost Voltage
Adjustable Boost Current Limit
Integrated Power FET and Diode
No Transformer Required
The boost voltage is set using two external resistors,
and the boost current limit is programmable via the
REXT resistor. A typical start-up time of 2 ms makes
the DRV2665 an ideal piezo driver for fast haptic
responses. Thermal overload protection prevents the
device from being damaged when overdriven.
•
•
•
•
Fast Start Up Time of 2 ms (typical)
Wide Supply Voltage Range of 3 V to 5.5 V
1.8 V Compatible, 5 V Tolerant Digital Pins
__
__
Available in a 4 mm × 4 mm × 0.9 mm QFN
package (RGP)
•
Pin-Similar with DRV8662
L1
3 V to 5.5 V
APPLICATIONS
DRV2665
C
VDD
•
•
•
•
•
•
Mobile Phones
VDD
SW
VBST
PVDD
Tablets
VREG
Portable Computers
Keyboards and Mice
Electronic Gaming
Touch Enabled Devices
C
VBST
C
VREG
R1
R2
R
R
PU
PU
FB
SDA
SCL
I2C
IN+
IN-
OUT+
OUT-
Analog
Input
Piezo
Actuator
VPUMP
REXT
R
EXT
C
GND
PUMP
space
space
space
space
For more information, please contact your local TI sales representative.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.