DP83826E, DP83826I
ZHCSKM7F –DECEMBER 2019 –REVISED NOVEMBER 2022
www.ti.com.cn
5 Mode Comparison Tables
The DP83826 can be strapped to operate in either ENHANCED mode or BASIC mode. ENHANCED mode
allows the DP83826 to support real-time Ethernet applications in addition to standard Ethernet applications.
BASIC mode allows the DP83826 to support standard Ethernet applications. Additionally, the DP83826 pinout in
BASIC mode matches a common PHY pinout used in many applications.
表5-1. Selecting EHANCED Mode or BASIC Mode
ENHANCED Mode
BASIC Mode
Connect ModeSelect (Pin 1) to VDDIO through pullup resistor
Short ModeSelect (Pin 1) to GND
表5-2. Pin Map Difference Between ENHANCED Mode and BASIC Mode
PIN NO.
31
ENHANCED MODE
CLKOUT/LED1
PWRDN/INT
BASIC MODE
LED1/TX_ER
INT
DESCRIPTION
Offers reference clockout 25 MHz at POR. Clock is not
interrupted by RST_N.
21
Offers power down as default pin function
表5-3. Hardware Bootstraps Difference Between ENHANCED Mode and BASIC Mode
HARDWARE BOOTSTRAPS
ENHANCED Mode(3)
BASIC Mode
Fast link-drop enable and disable(1)
Yes
No
MLT3_error and Signal Energy
enabled by default
Fast link-drop detection mechanism
Strap controllable
Auto-MDIX enable and disable(1)
Force MDI/MDIX selection(1)
RMII back-to-back repeater mode configuration(2)
MII or RMII selection
Yes
No
Yes
No
Yes
No
Yes
Yes
Speed selection (10 M or 100 M)
MII isolate enable and disable
Auto-negotiation enable and disable
Number of PHY addresses available
Half or full duplex selection
No
Yes
No
Yes
Yes
Yes
8
8
No
Yes
Yes
No
CLKOUT in place of LED1
Odd Nibble Detection
Strap controllable
Disabled by default
(1) These pin bootstraps enable the ENHANCED mode DP83826 to meet the stringent requirements of real-time Ethernet applications.
(2) This pin bootstrap enables the ENHANCED mode DP83826 to function as an RMII repeater.
(3) ENHANCED mode includes all the modes of operation BASIC mode can be configured to. The difference is, in these modes of
operation, ENHANCED mode may require register configuration.
备注
For a step by step approach on using the DP83826 BASIC mode in existing systems that use a
common standard Ethernet pinout, please refer to SNLA338.
备注
For standardized list of Ethernet related acronyms, refer to Chinese and English Definitions of
Acronyms Related to Ethernet Products.
Copyright © 2022 Texas Instruments Incorporated
4
Submit Document Feedback
Product Folder Links: DP83826E DP83826I